Bedienungsanleitung Samsung HW-Q700A (Seite 30 von 33) (Englisch)

804961

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

ENG - 30

14 TROUBLESHOOTING

Before seeking assistance, check the following.

Soundbar does not turn on

• Check whether the power cord of the Soundbar is correctly

inserted into the outlet.

Soundbar works erratically

• After removing the power cord, insert it again.

• Remote the power cord from the external device and try again.

• If there is no signal, the Soundbar automatically turns off after a

certain period of time. Turn on the power. (See page 9.)

In case the remote control does not work

• Point the remote directly at the soundbar.

• Replace the batteries with new ones.

The Soundbar does not output any sound

• The volume of the Soundbar is too low or muted. Adjust the

volume.

• When any external device (STB, Bluetooth device, mobile device,

etc.) is connected, adjust the volume of the external device.

• For sound output of the TV, select Soundbar. (Samsung TV:

Home ( ) → Settings ( ) → Sound → Sound Output → Select

Soundbar)

• The cable connection to the Soundbar may not be loose. Remove

the cable and connect again.

• Remove the power cord completely, reconnect, and turn the

power on.

• Initialise the product and try again. (See page 29.)

The Subwoofer does not output any sound

• Check whether the LED indicator on the rear of the Subwoofer

is on in blue. Reconnect the Soundbar and Subwoofer if the

indicator is blinking in blue or turned red. (See page 13.)

• You may experience an issue if there is an obstacle between the

Soundbar and Subwoofer. Move devices to an area away from

obstacles.

• Other devices sending radio frequency signals in proximity may

interrupt the connection.

Keep your speaker away from such devices.

• Remove and reconnect the power plug.

The Subwoofer volume is too low

• The original volume of the content you are playing may be low.

Try adjusting th e Subwoofer level. (See page 10.)

• Bring the Subwoofer speaker closer to you.

In case the TV is not connected via HDMI TO TV (eARC/ARC)

• Check whether the HDMI cable is correctly connected to the ARC

terminal. (See page 16.)

• Connection may not be possible due to the connected external

device (set-top box, game machine, etc.). Directly connect the

Soundbar.

• HDMI-CEC may not be activated on the TV. Turn on the CEC on the

TV menu. (Samsung TV: Home ( ) → Settings ( ) → General →

External Device Manager → Anynet+ (HDMI-CEC) ON)

• To connect with eARC, the eARC function in the TV menu should

be set to On. (Samsung TV: Home ( ) → Settings ( ) → Sound

→ Expert Settings → HDMI-eARC Mode (Auto))

There is no sound in when connecting to the TV in HDMI TO TV

(eARC/ARC) mode

• Your device is unable to play the input signal. Change the

TV’s audio output to PCM or Dolby Digital. (For a Samsung TV:

Home ( ) → Settings ( ) → Sound → Expert Settings → Digital

Output Audio Format)

The soundbar will not connect via Bluetooth.

• When connecting a new device, switch to “BT PAIRING” for

connection. (Press the PAIR button on the remote control or

press the (Source) button on the body for at least 5 seconds.)

• If the Soundbar is connected to another device, disconnect that

device rst to switch the device.

• Reconnect it after removing the Bluetooth speaker list on the

device to connect. (Samsung TV: Home ( ) → Settings ( ) →

Sound → Sound Output → Bluetooth Speaker List)

• The automatic TV connection may be disabled. While the

Soundbar is in “BT READY”, press and hold the Left button on

the Soundbar remote control for 5 seconds to select ON-TV

CONNECT. If you see OFF-TV CONNECT, press and hold Left

button again for 5 seconds to switch the selection.

• Remove and reconnect the power plug, then try again.

• Initialise the product and try again. (See page 29.)

The sound drops out when connected via Bluetooth

• Some devices can cause radio interference if they are located too

close to the Soundbar. e. g. microwaves, wireless routers, etc.

• If your device that is connected via Bluetooth moves too far away

from the soundbar, it may cause the sound to drop out. Move the

device closer to the soundbar.

• If a part of your body is in contact with the Bluetooth transceiver

or the product is installed on metal furniture, the sound may drop

out. Check the installation environment and conditions for use.

Unable to connect to Wi-Fi

• Check whether your wireless router is on.

• Turn off the router, turn it back on, and then try again.

• The soundbar will not connect if the wireless signal is too weak.

Try moving the router closer to the soundbar, or eliminating

any obstacles that are between the soundbar and the router, if

possible.

• If your wireless router is new, you will need to recongure the

speaker’s network settings.

The soundbar does not turn on automatically with the TV.

• When you turn off the Soundbar while watching TV, power

synchronization with the TV is disabled. First turn off the TV.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HW-Q700A Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HW-Q700A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info