Bedienungsanleitung Samsung HW-Q700B (Seite 36 von 40) (Englisch)

804993

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENG - 36

In case there is sound jitter, delays, or noise from the Subwoofer

and Surround Speaker

• If there are any objects between the Soundbar and Subwoofer

speaker, this could cause a problem. Please reposition these to a

place without such an object.

• There may be sound jitter or delays when the Subwoofer and

Surround Speaker are far from the Soundbar. Please place them

near the Soundbar.

• There may be sound jitter or delays when the Soundbar is near an

instrument or electrical device that can cause radio interference.

Place the Soundbar far from such devices that can cause radio

interference. (E.g., wireless router)

• Change the TV network connection status from wireless to wired.

The Subwoofer volume is too low

• The original volume of the content you are playing may be low.

Try adjusting the Subwoofer level. (See page 10.)

• Bring the Subwoofer speaker closer to you.

If the TV is not connected via HDMI TO TV (eARC/ARC)

• Check whether the HDMI cable is correctly connected to the ARC

terminal. (See page 18.)

• Connection may not be possible due to the connected external

device (set-top box, game machine, etc.). Directly connect the

Soundbar.

• HDMI-CEC may not be activated on the TV. Turn on the CEC on

the TV menu. (Samsung TV: Home ( ) → Menu → Settings ( )

→ All Settings ( ) → Connection → External Device Manager →

Anynet+ (HDMI-CEC) ON)

• To connect with eARC, the eARC function in the TV menu should

be set to On. (Samsung TV: Home ( ) → Menu → Settings ( ) →

All Settings ( ) → Sound → Expert Settings → HDMI-eARC Mode

(Auto))

There is no sound in when connecting to the TV in HDMI TO TV

(eARC/ARC) mode

• Your device is unable to play the input signal. Change the TV’s

audio output to PCM or Dolby Digital. (For a Samsung TV:

Home ( ) → Menu → Settings ( ) → All Settings ( ) → Sound

→ Expert Settings → Digital Output Audio Format)

Soundbar will not connect via Bluetooth.

• When connecting a new device, switch to “BT PAIRING” for

connection. (Press the PAIR button on the remote control or

press the (Mic On/Off) / (Source) button on the body for at

least 5 seconds.)

• If the Soundbar is connected to another device, disconnect that

device rst to switch the device.

• Reconnect it after removing the Bluetooth speaker list on the

device to connect. (Samsung TV: Home ( ) → Menu →

Settings ( ) → All Settings ( ) → Sound → Sound Output →

Bluetooth Speaker List)

• The automatic TV connection may be disabled. While the

Soundbar is in “BT READY”, press and hold the Left button on

the Soundbar remote control for 5 seconds to select ON-TV

CONNECT. If you see OFF-TV CONNECT, press and hold Left

button again for 5 seconds to switch the selection.

• Remove and reconnect the power plug, then try again.

• Initialise the product and try again. (See page 35.)

Sound drops out when connected via Bluetooth.

• Some devices can cause radio interference if they are located too

close to the Soundbar. e. g. microwaves, wireless routers, etc.

• If your device that is connected via Bluetooth moves too far away

from the soundbar, it may cause the sound to drop out. Move the

device closer to the soundbar.

• If a part of your body is in contact with the Bluetooth transceiver

or the product is installed on metal furniture, the sound may drop

out. Check the installation environment and conditions for use.

Soundbar will not connect to Wi-Fi.

• Check whether your wireless router is on.

• Turn off the router, turn it back on, and then try again.

• The soundbar will not connect if the wireless signal is too weak.

Try moving the router closer to the soundbar, or eliminating

any obstacles that are between the soundbar and the router, if

possible.

• If your wireless router is new, you will need to recongure the

speaker’s network settings.

The soundbar does not turn on automatically with the TV.

• When you turn off the Soundbar while watching TV, power

synchronization with the TV is disabled. First turn off the TV.

The AVA function (applicable models only) is not available in the

following cases.

• The AVA function (applicable models only) will not be available

using Q-symphony function.

• The AVA function (applicable models only) will not be available

when the microphone is turned off.

After connecting the TV to the Soundbar, I switched the Soundbar

mode. Then no sound is output from the TV.

• If you connect your Soundbar to a mobile device while the

Soundbar is connected to the TV, the Soundbar outputs sound

from the mobile device while keeping the TV connection. So the

TV sound will not be delivered anywhere.

• Disconnect the mobile device, and the TV sound will be output

from the Soundbar again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HW-Q700B Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HW-Q700B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info