Bedienungsanleitung Samsung HW-Q990C (Seite 6 von 29) (Englisch)

804972

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

ENG - 6

Sound Control

By pressing the button, you can set the audio function such as SpaceFit Sound, AVA, Voice enhance mode, Night

mode, Sync, Surround speaker mode, Virtual. The desired item can be adjusted using the Up/Down buttons.

• Voice enhance mode enhances spoken dialog in movies and TV to make it easier to hear.

• Night mode is optimized for night time viewing with the settings adjusted to bring the volume down but keep

the dialog clear.

• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band.

150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each

can be adjusted to a setting between -6 to +6 using the Up/Down buttons.

(Make sure the Sound mode is set to “Standard”.)

• If the video on the TV and audio from the Soundbar are not synchronized, select Sync in Sound Control, and

then set the audio delay between 0~300 milliseconds by using the Up/Down buttons.

• Sync is only supported for some functions.

• Available Surround speaker mode settings may vary depending on the specication of the compatible (with

the Soundbar) surround speaker.

• The Virtual Speaker function can be turned ON/OFF by using the Up/Down buttons.

Play / Pause

You can also play or pause music by pressing the button.

Up/Down/Left/

Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

• Music Skip

Press the Right button to select the next music le. Press the Left button to select the previous music le.

• ID SET

Use this option when the Subwoofer or Surround Speakers are not connected or need reconnection.

While powered off, press and hold the Up button for 5 seconds to perform ID SET. (See page 11.)

Info

Press to display information about the active function or the codec available.

In BT mode, it displays the connected device (when pairing is complete) or “BT ready” (when pairing is required).

WOOFER LEVEL

Push the button up or down to adjust the level of the woofer (bass).

VOLUME

Push the button up or down to adjust the volume.

• Mute

Press the VOL button to mute the sound. Press it again to unmute the sound.

TONE CONTROL

By pressing the button, you can adjust the volume of the treble or bass sound. The dered item can be adjusted

using the Up/Down buttons. This function is enabled in Sound mode excluding in Standard mode.

• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust

the volume between -6~+6 by using the Up/Down buttons.

• Once the bass level is changed, the woofer level will be also adjusted accordingly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HW-Q990C Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HW-Q990C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info