Bedienungsanleitung Samsung LE 40C570 (Seite 26 von 197) (Deutsch, Englisch, Holländisch, Französisch)

450002

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

English

Advanced Features

Connecting Wireless Network ¦

To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which

you connect to your TV’s back or side panel USB jack. See the illustration below.

The LAN Port on

the Wall

LAN Cable

Wireless IP sharer

Samsung Wireless

LAN Adapter

TV Side Panel

TV Rear Panel

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s

Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you

play video over a IEEE 802.11B/G connection, the video may not play smoothly.

NOTE

✎

You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.

Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers,

Ecommerce sites and Samsungparts.com.

To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TV can

use a DHCP or static IP address to connect to the wireless network.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently

being used by another device nearby, this will result in interference and communication failure.

If you apply a security system other than the systems listed blow, it will not work with the TV.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed)

for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN

(Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.

Keep the Samsung Wireless LAN Adaptor at a distance from the TV. If you watch the TV with the adaptor connected nearby, images

may appear corrupted for some channels.

If your router, modem, or device is not, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”

Connection Methods

: You can setup the wireless network connection on six ways.

PBC (WPS) –

Auto Setup (Using the Auto Network Search function) –

Manual Setup –

Ad-Hoc –

All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not supported.

To use the SWL(Samsung Wireless Link) function, connect to the

✎

USB 1 (HDD) port.

Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter.

In such case, establish a connection using one of the following methods:

Method 1

Connect using the USB right angle adapter

Method 2

Connect via an extension cable

ali

BN68-02791AEGH_00Eng.indb 26 3/9/2010 1:06:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE 40C570 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung LE 40C570

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info