Bedienungsanleitung Samsung LE 46C530 (Seite 13 von 197) (Deutsch, Englisch, Holländisch, Französisch)

450009

Zoom out

Zoom in

Vorherige Seite

1/197

Nächste Seite

English

03 Basic Features

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number.

Satellite System Setup is available when Antenna is set to

Satellite. Before running Auto Store, set Satellite System Setup.

Then channel scan is run normally.

Satellite Selection: ■ You can choose the satellites for this TV.

LNB Power (Off / On) ■ : Enables or disables the power

supply for the LNB.

LNB Settings ■ : Conﬁgures the outdoor equipment.

Satellite: Selects the satellite for receiving digital

broadcasts.

Transponder: Selects a transponder from the list or adds a

new transponder.

DiSEqC Mode: Selects DiSEqC mode for the selected LNB.

Lower LNB Oscillators: Sets the LNB oscillators to a lower

frequency.

Upper LNB Oscillators: Sets the LNB oscillators to a higher

frequency.

Tone 22 khz (Off / On / Auto): Selects the Tone 22 kHz

depending on the LNB type. For a universal LNB it should

be Auto.

Signal Quality: Display the current status of broadcasting

signal.

Positioner Settings ■ : Conﬁgures the antenna positioner.

Positioner (Off / On): Enables or disables the positioned

control.

Positioner Type (USALS / DiSEqC 1.2): Sets the

positioned type between DiSEqC 1.2 and USALS(Universal

Satellite Automatic Location System).

My Longitude

–

: Sets the longitude for my location.

My Latitude

–

: Sets the latitude for my location.

Satellite

–

Longitude Settings: Sets the longitude of user

deﬁned satellites.

User Mode: Sets the position of satellite antenna according

to each satellite. If you store the current position of satellite

antenna according to a certain satellite, when the signal of

that satellite is needed, the satellite antenna can be moved

to pre-populated position.

Satellite

–

: Selects the satellite to set the position for.

Transponder

–

: Selects a transponder from the list for

signal reception.

Moving Mode

–

: Selects the movement mode between

discrete and continuous movement.

Step Size

–

: Adjusts the step size degrees for the antenna

rotation. Step Size is available when Moving Mode is set

to Step.

Go to Stored Position

–

: Rotates the antenna to the

stored satellite position.

Antenna Position

–

: Adjusts and stores the antenna

position for the selected satellite.

Store Current Position

–

: Stores current position as the

selected positioner limit.

Signal Quality

–

: Display the current status of

broadcasting signal.

Installer Mode: Sets limits to the scope of movement of

satellite antenna or reset the position. Generally, installation

guide uses this function.

Limit

–

Position (East / West): Selects the direction of

the positioner Limit.

Antenna Position

–

: Adjusts and stores the antenna

position for the selected satellite.

Store Current Position

–

: Stores the current position

as the selected positioner Limit.

Go to Zero

–

: Moves the antenna to the reference

position.

Reset Positioner Limit

–

: Allows the antenna to rotate

over the full arc.

Reset All Setting (OK / Cancel) ■ : All satellite settings will

be reset to the initial values.

¦ Editing channels

Channel Manager Option Menu

(in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name or number using the Edit

Channel Name or Edit Channel Number menu.

Edit Channel Name ■ (analogue channels only): Assign

your own channel name.

Edit Channel Number ■ (digital channels only): Edit the

number by pressing the number buttons desired.

Other Features ¦

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and

symbol rate for a cable network search.

Freq.Start / Freq.Stop ■ : Set the start or stop frequency

(differs in each country)

Modulation ■ : Displays available modulation values.

Symbol Rate ■ : Displays available symbol rates.

BN68-02791AEGH_00Eng.indb 13 3/9/2010 1:06:14 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE 46C530 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info