Bedienungsanleitung Samsung LE26A466 (Seite 30 von 113) (Englisch)

68375

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

English - 30

Resetting the Picture Settings to the Factory Defaults

1 To select the desired picture mode, follow the “Changing

the Picture Standard” instructions numbers 1 and 2. (see

page 28)

Press the ▲ or ▼ button to select Picture Reset, then

press the

ENTER

button.

Press the ▲ or ▼ button to select OK or Cancel then

press the

ENTER

button.

®

Each mode can be reset.

 Screen Burn Protection

To reduce the possibility of screen burn, this unit is

equipped with screen burn prevention technology. This

technology enables you to set picture movement up/down

(Vertical Line) and side to side (Horizontal Dot). The Time

setting allows you to program the time between movement

of the picture in minutes.

− Pixel Shift:

Using this function, you can minutely move

pixels on the PDP in horizontal or vertical direction to

minimize after image on the screen.

− Set

Pixel Shift t

o On by pressing the ▲ or ▼

button, then press the

ENTER

button.

− Select the required option by pressing the ▲ or ▼

button, then press the

ENTER button.

Available options:

Horizontal Dot,

Vertical Line,

Time

®

Optimum condition for pixel shift;

TV/Ext/AV/Component/

HDMI

Horizontal Dot 44

Vertical Line 44

Time (minute) 44

min

®

This function is not available in the Just Scan mode.

®

The Pixel Shift value may differ depending on the monitor size (inches) and mode.

− All White:

This function helps remove after images on the screen by changing the colour of

pixels to white. Use this function when there are remaining after images or symbols on the screen

especially when you displayed a still image on the screen for a long time.

− Scrolling:

This function helps remove after images on the screen by moving all the pixels on the

PDP according to a pattern. Use this function when there are remaining after images or symbols

on the screen especially when you displayed a still image on the screen for a long time.

− Side Gray:

When you watch TV with the screen ratio of 4:3, the screen is prevented from any

damage by adjusting the white balance on both extreme left and right sides.

Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.

Light:

When you set the screen ratio to 4:3, it brightens the left and right sides.

®

To remove after images on the screen, use either White or Scrolling function. Although both of

the two functions remove after images on the screen,

Scrolling

is more effective.

®

The after image removal function has to be executed for a long time (approximately 1 hour) to

effectively remove after images on the screen. If after image is not improved after the execution

of the function, repeat the function again.

®

Press any button on the remote control to cancel this feature.

Picture

Detailed Settings

Picture Options

Picture Reset

Cancel

Screen Burn Protection

Pixel Shift ►

All

White

Scrolling

Side

Gray : Light

ReturnEnterMove

Pixel Shift

Pixel Shift : On ►

Horizontal

Dot : 4

Vertical Line : 4

Time : 2 min

ReturnEnterMove

wOw[\WPiu]_TWX\[^hXUGGGZW YWW_TW\TX\GGG㝘䟸G[aYWaY[

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE26A466 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info