Bedienungsanleitung Samsung LE32A568 (Seite 30 von 162) (Englisch, Französisch)

64976

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

English - 28

Resetting the Picture Settings to the Factory Defaults

1. To select the desired picture mode, follow the “Changing the Picture

Standard” instructions numbers 1 and 2. (see page 25)

Press the ▲ or ▼ button to select “Picture Reset”, then press the

ENTER button.

3. Press the ▲ or ▼ button to select “OK” or “Cancel”, then press the

ENTER button.

Press the EXIT button to exit.

Each mode can be reset.

➣

Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help

reduce any static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen

with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on

the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.

DNIe™ (Digital Natural Image engine)

DNIe™

This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement

and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you.

DNIe™ technology will t every signal into your eyes.

This function is not available in “Movie” and “Standard” mode.

HDMI Black Level: Normal/Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

Movie Plus: Off/Low/Medium/High/Demo

You can view more natural skin and clear text even in fast moving scenes.

Use this function when watching movies.

This function is not available in “Wide Zoom” and “Zoom” modes.

This function is not available when “PIP” is set to “On”.

It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.

Blue Only Mode: Off/On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red

and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of

video equipment such as DVD players, Home Theaters, etc.

Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video

device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.

“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.



➣



➣



➣



➣



➣

Picture

Detailed Settings

Picture Options

PictureReset  ►

Cancel

BN68-01409H-00ENG.indb 28 2008-04-28 �� 5:18:23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE32A568 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung LE32A568

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info