64976
43
Zoom out
Zoom in
Vorherige Seite
1/162
Nächste Seite
English - 41
Upgrading the Software
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as
part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You
are given the option to install the upgrade.
1.
Insert a USB drive containing the rmware upgrade into the WISELINK port
on the side of the TV.
2.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “Software Upgrade”, then press the
ENTER button.
4. Press the ▲ or ▼ button to select “BY USB”, “BY Channel” or “Standby
Mode Upgrade”. Press the ENTER button.
BY USB :
- Preset : Insert a USB drive containing the rmware upgrade into TV.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The TV will turn off and turn on
automatically after completing the rmware upgrade. Please check the
rmware version after the upgrades are complete. When software is
upgraded, video and audio settings you have made will return to their
default (factory) settings. We recommend you write down your settings so
that you can easily reset them after the upgrade.
BY Channel :
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade :
To continue software upgrade with master power on, Select On by pressing
the ▲ or ▼ button. 45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power of the unit is turned
on internally, the screen may be on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until the software upgrade is
completed.
Alternative Software :
To display the software version information.
Setup
Energy Saving : Off
PIP
SoftwareUpgrade
Common Interface
HDMI IN3HDMI IN3
TV Side Panel
USB Drive
Software Upgrade
Current Version 2008/01/01_000075
BY USB
BY Channel
Standby Mode Upgrade : On
Version Change ----/--/--_--------
ReturnEnter
Move
BN68-01409H-00ENG.indb 41 2008-04-28 �� 5:18:27
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung LE32A568 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Samsung LE32A568

Samsung LE32A568 Bedienungsanleitung - Deutsch - 104 seiten

Samsung LE32A568 Bedienungsanleitung - Holländisch - 52 seiten

Samsung LE32A568 Bedienungsanleitung - Holländisch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info