Bedienungsanleitung Samsung LE32M51B (Seite 59 von 70) (Englisch)

5429

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

English-57

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of your

set and contact your local dealer.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,

distorted sound

Remote control malfunctions

“Check signal cable.” message is displayed.

On PC mode, “Not Supported Mode.”

message is displayed.

The image is too light or too dark.

On PC mode, horizontal bars appear to flicker,

jitter or shimmer on the image.

On PC mode, vertical bars appear to flicker,

jitter or shimmer on the image.

On PC mode, screen is black and power

indicator light blinks every 1 second.

On PC mode, image is not stable and

may appear to vibrate.

On PC mode, image is not centered

on the screen.

Check that the mains lead has been connected to a wall socket.

Check that you have pressed the

POWER

buttons on the lower-right

panel.

Check the picture contrast and brightness settings.

Check the volume.

Check whether the MUTE button has been pressed on the remote control.

Check if Internal Mute is off

Adjust the colour settings.

Check that the broadcast system selected is correct.

Try to identify the electrical appliance that is affecting the set and move it

further away.

Plug your set into a different mains socket.

Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

Check that the signal cable is firmly connected to the PC or video sources.

Check that the PC or video sources are turned on.

Check the maximum resolution and the frequency of the video adapter.

Compare these values with the data in the Display Modes.

Adjust the Brightness and Contrast.

Adjust the Fine function.

Adjust the Coarse function and then adjust the Fine function.

The TV is using its power management system.

Move the computer’s mouse or press any key on the keyboard.

Check that the display resolution and frequency from your computer or

video board is an available mode for your set. On your computer check:

Control Panel, Display, Settings.

If the setting is not correct, use your computer utility programme to change

the display settings.

Your set supports multiscan display functions within the following

frequency domain:

Horizontal frequency(kHz): 30~ 61

Vertical frequency(Hz): 60~75

Maximum refresh rate (at 60Hz): 1360 X 768

Adjust the horizontal and vertical position.

The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require sophisticated technology to produce. However,

there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

BN68-00926A-00Eng.qxd 6/8/05 2:29 PM Page 57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE32M51B Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung LE32M51B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info