Bedienungsanleitung Samsung ML-551x Series (Seite 19 von 130) (Englisch)

586982

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Regulatory information_ 19

European Radio Approval Information (for products fitted with EU-approved radio devices)

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be

present (embedded) in your printer system, which is intended for home or office use. This section is only applicable if these devices are pres-

ent. Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the European Uni

on or associated areas if a CE mark 

with a Notified Body Registration Number and the Alert Symbol is on the system label.

The power output of the wireless device or devices that may be embedded

in you printer is well below the RF exposure limits as set by the

European Commission through the R&TTE directive.

European States qualified under wireless approvals:

Austria, Belgium, Cyprus, Czech Republic, Denm

ark, Estonia, Finland, France (with frequency restrictions), Germany, Greece, Hungary, Ire-

land, Italy, Latvia, Lithuania, Luxem

bourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.

EEA/EFTA countries

Iceland, Liechtenstein, Norway and Switzerland

European States with restrictions on use:

• EU: In France, the frequency range is restricted to 2446.5-2483.5 MHz for devices above 10 mW transmitting power such as wireless

• EEA/EFTA countries: No li

mitations at this time

REGULATORY COMPLIANCE STATEMENTS

Wireless Guidance

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be

present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.

Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The

wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If

the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices

are closely regulated and use may not be allowed.

The power output of the wireless device or devices that may be emb

edd

ed in your printer is well below the RF exposure limits as known at this

time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety stan-

dards and recommendations, manufacturer believes these devices are safe

for use. Regardless of the power levels, care should be taken to

minimize human contact during normal operation.

As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body

(this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are

on and transmitting.

This transmitter must not be collocated or operation

in conjunction with any other antenna or transmitter.

Some circumstances require restrictions on wireless devices. E

xamples of common restrictions are listed below:

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless

devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices

are examples of devices that provide wireless communication.

In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless

device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use

of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices,

ask the applicable authority for authorization prior to use or turning on the wireless device.

Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling

between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of

a wireless device in the destination country.

If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are

in place and the system is fully assembled.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it.

Contact manufacturer for service.

Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufac-

turer Technical Support for additional information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung ML-551x Series Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung ML-551x Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info