Bedienungsanleitung Samsung ML-551x Series (Seite 30 von 130) (Englisch)

586982

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Getting started_ 30

2.getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

This chapter includes:

• Setting up the hardware

• Printing a demo page

• Supplied software

• System requirements

• Installing locally connected machine’s driver

Supported optional devices and features may differ according to your

model. Please check your model name (See "Features by Models" on

page 25).

SETTING UP THE HARDWARE

This section shows the steps to set up the hardware, as is explained in the

Quick Installation Guide. Make sure you read the Quick Installation Guide

first and follow the steps below:

1. Select a stable loca

tion.

Select a level, stable place with adequate space for a

ir circulation. Allow

extra space to open covers and trays.

The area should be well ventilated and away from direct sunlight or

sources of

at, cold, and humidity. Do not set the machine close to the

edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft.). Refer to the

altitude setting to optimize your printing (See "Altitude adjustment" on

page 42).

Place the machine on a flat, stable surface so that

there is no incline

greater than 2 cm (0.79 inch). Otherwise, printing quality may be

affected.

2cm

(0.79 in)

2cm

(0.79 in)

2. Unpack the machine and check all the enclosed items.

3. Remove the tape.

4. Install all the necessary items such

as toner cartridge and optional

goods. (See "Supplies and accessories" on page 97).

5. Load paper (See "Loading paper in tray" on page 46).

6. Make sure that all cables are connected to the machine.

7. Turn the machine on.

• This equipment will be inoperable when mains power fails.

• When you move the machine, do not tilt or turn it upside down.

Otherwise

, the inside of the machine may be contaminated by

toner, which can cause damage to the machine or bad printing

quality.

PRINTING A DEMO PAGE

Print a demo page to make sure that the machine is operating properly.

1. Press Menu on the control pa

nel.

2. Press the up/down arrow to highlight In

formation and press OK.

3. Press the up/down arrow to highlight Demo Page a

ppears and press

OK.

4. W

hen Print? app

ears, press OK.

The machine starts to print a demo page.

SUPPLIED SOFTWARE

After you have set up your machine and connected it to your computer, you

must install the printer software. If you are a Windows or Mac OS, install the

software from the supplied CD and if you are a Linux or a UNIX OS user,

download the software from the Samsung website (www.sam-

sung.com/printer) and install.

Machine software are occasionally updated due to release of new

operating system and etc. If needed, download the latest version from

the Samsung website. (www.samsung.com/printer)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung ML-551x Series Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung ML-551x Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info