586982
48
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
Media and tray_ 48
fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps
and strips might cause wrinkling, creasing, or jams and may even dam-
age the fuser.
For the best print quality, posi
tion margins no closer than 15 mm from
the edges of the envelope.
Avo
id printing over the area where the envelope’s seams meet.
Transparency
To avoid damaging the machine, use only transparencies designed for use
in laser printers.
Transparencies used in the machine must be able to withstand
machine’s fusing temperature.
Place them on a flat surface after removing them from the machine.
Do not leave unused transparencies in the paper tray for long periods of
ti
me. Dust and dirt may accumulate on them, resulting in spotty printing.
To avo
id smudging caused by fingerprints, handle them carefully.
To avoid fading, do not expose printed transparencies to prolonged sun-
light.
Ensure
that transp
arencies are not wrinkled, curled, or have any torn
edges.
Do not use transparencies that separates from the backing sheet.
To prevent transparencies from sticking to each other, do not let the
p
rinted sheets stack up as they are begin printed out.
Base
type transparency (ex. Xerox 3R3117) results in better image and
pap
er handling quality than paper backed (ex. Xerox 3R3028) or remov-
able stripe (3R3108) ones.
Depending on the selection or storage conditions of the transpar-
ency, jam or image scratch might occur.
Labels
To avoid damaging the machine, use only labels designed for use in laser
machines.
When selecting labels, consider the following factors:
- Adhesives: Th
e adhesive material should be stable at your
machine’s fusing temperature about 170°C (338 °F).
- Arra
ngement: Onl
y use labels with no exposed backing between
them. Labels can peel off sheets that have spaces between the
labels, causing serious jams.
- Curl: Prior to
printing, labels must lie flat with no more than 13 mm
of curl in any direction.
- Co
ndition: D
o not use labels with wrinkles, bubbles, or other indica-
tions of separation.
Do not use labels with slick back.
Do not use partially used labels.
Do not use the labels with separated edges.
Make sure that there is no exposed adhesive material between labels.
Exp
osed areas can cause labels to peel off during printing, which can
cause paper jams. Exposed adhesive can also cause damage to
machine components.
D
o not run a sheet of labels through the machine more than once. The
a
dhesive backing is designed for only a single pass through the
machine.
D
o not use labels that are separating from the backing sheet or are wrin-
kled, bubbled, or otherwise damaged.
Card stock/Custom-sized paper
Do not print on media smaller than 76.2 mm (3 inches) wide or 127 mm
(5 inches) long.
In the software application, set margins at least 6.4 mm (0.25 inches)
away from the edges of the material.
U
sable minimum weight of 3*5 inches paper is 105g/m². (28 lbs bond)
Ensure that 76.2 mm (3 inches) X 127 mm (5 inches) is not curled or has
no torn edges. Depending on the curl of 76.2 mm (3 inches) X 127 mm
(5
inches) paper, jam might occur.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung ML-551x Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Samsung ML-551x Series

Samsung ML-551x Series Bedienungsanleitung - Deutsch - 137 seiten

Samsung ML-551x Series Bedienungsanleitung - Holländisch - 132 seiten

Samsung ML-551x Series Bedienungsanleitung - Französisch - 132 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info