Bedienungsanleitung Samsung NZ85C6058 (Seite 32 von 34) (Englisch)

805046

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

32 English

Troubleshooting and service

Information code Possible cause Solution

There is a problem with the

burner temperature sensor.

Restart the appliance

using the On/Off key.

If the problem continues,

disconnect power for more

than 30 seconds. Then,

restart the appliance and try

again. If the problem still

continues, contact a local

service centre.

The temperature is sensed

higher than specied.

There is a problem with the PBA

sensor.

The DC Motor fails to operate

because of problems with the

PCB or wiring, or electrical

disturbance on the motor blade.

A key is being pressed for more

than 8 seconds.

Check if the key is wet or is

being pressed.

If the problem continues,

restart the appliance using

the On/Off key. If the

problem still continues,

contact a local service centre.

Communications between main

and sub PCBs fail.

Restart the appliance

using the On/Off key.

If the problem continues,

disconnect power for more

than 30 seconds. Then,

restart the appliance. If the

problem still continues,

contact a local service centre.

The touch-enabled IC

communicates abnormally.

It is out of normal voltage

(220 ~ 240 V).

Check home power

environment.

If the cooking container is not

suitable for the induction, or

operates without the cooking

container, it is displayed.

Use a cooking container

suitable for inductions.

What should I do if the cooking zone will not switch on or off?

This could be because of one of the following possibilities:

• The control panel is partially covered by a damp cloth or liquid.

• The child safety lock is on. and display .

What should I do if the display is illuminated?

Check for the following:

• The control panel is partially covered by a damp cloth or liquid.

To reset, press the On/Off key.

• If liquid has overowed on control panel, please wipe the liquid.

What should I do if the display is illuminated?

Check for the following:

• The hob is overheated because of abnormal operation.

• After hob is cooled down, press the On/Off key for resetting.

What should I do if the display is illuminated?

Check for the following:

• Cookware is unsuitable, too small, or no cookware has been placed on the

cooking zone.

• If you use suitable cookware, displayed message will automatically disappear.

What should I do if the cooling fan runs after the hob is turned off?

Check for the following:

• When you have nished using the hob, the cooling fan runs by itself for

cooling down.

• After the hob’s electronics has cooled down or elapsed max time (10 minutes)

the cooling fan will be turned off.

• If you request a service call because of an information made in operating the

appliance, the visit from the customer service technician may incur a charge

even during the warranty period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung NZ85C6058 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung NZ85C6058

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info