Bedienungsanleitung Samsung PS43F4500AW (Seite 13 von 75) (Deutsch, Englisch, Französisch, Italienisch)

528455

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

English

Issues Solutions and Explanations

There is a plastic smell from the TV. • This smell is normal and will dissipate over time.

The TV Signal Information is

unavailable in the Self Diagnosis

Test menu.

• This function is only available with digital channels from an Aerial / RF / Coax connection.

TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.

There are difﬁculties assembling the

stand base.

• Make sure the TV is placed on a ﬂat surface. If you can not remove the screws from the TV, please use a magnetized

screw driver.

The Broadcasting menu is grey out

(unavailable).

• The Broadcasting menu is only available when the TV source is selected.

Your settings are lost after 30 minutes

or every time the TV is turned off.

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you want to change the

settings from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU →

Support → Use Mode.

You have intermittent loss of audio

or video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible enough for

long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you

look closely at the edge of the frame

of the TV.

• This is part of the product’s design and is not a defect.

The PIP menu is not available. • PIP functionality is only available when you are using a HDMI or components source.

You turned the TV off 45 minutes

ago, and it turned on again.

• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade ﬁrmware downloaded whilst your

watching TV.

The message “Scrambled Signal” or

“Weak or No Signal” appears.

• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.

There are recurrent picture/sound

issues.

• Check and change the signal/source.

A reaction may occur between the

rubber cushion pads on the base

stand and the top ﬁnish of some

furniture.

• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

The message “This ﬁle may not be

playable properly.” appears.

• This may appear because of high bit rate of content. Content generally will play but could experience some playability

issue.

✎

You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsumg.com → support) by

USB.

English - 13

[PF45005000-ZGZT]BN68-04819B.indb 13 2013-01-23  10:57:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung PS43F4500AW Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung PS43F4500AW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info