02 OPERATING01 SETTING UP
Setting up _9
ASSEMBLE THE FREEZER
DRAWER
To reattach the freezer drawer, assemble parts in
reverse order.
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator,
you want to make sure the Refrigerator is level
so that you can make fi nal adjustments. If the
Refrigerator is not level, it will not be possible to
get the doors perfectly even.
Insert a fl at-blade screwdriver (-) into a notch on
the left control lever, and turn it count clockwise to
level the refrigerator. (You turn the lever clockwise
to lower the refrigerator and counterclockwise to
raise it.)
Both control levers must be touching the
fl oor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember a level Refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
Refrigerator.
1. If you open the drawer
1
, you can see the
lower hinge
2
.
2. Insert the supplied hex wrench
3
into the
shaft
4
of the lower hinge.
3. Please adjust the height by turning the hex
wrench
3
clockwise ( ) or counter-
clockwise (
).
When you turn the hex wrench counter-
clockwise(
), the door will move up.
1. After adjusting the doors, please insert the
supplied fastener-ring
5
using a pair of pliers
6
in the gap between the hinge-grommet
7
and the lower hinge
8
. The number of
fastener-rings you’ll need to insert depends on
the gap.
Two fastener-rings are enclosed with the
refrigerator.
The thickness of each fastener-ring is 1mm.
ADJUSTING THE FREEZER
DRAWER LEVEL
