‑
DISASSEMBLY OF THE FREEZER DOOR
REVERSING THE DOOR SWING
COVER WIRE HINGE,L
STOPPER DOOR
GROMMET HINGE
SHAFT
SHIM
GROMMET
HINGE
GAP SPACE
DOOR
ASSY
HANGE MID
7.
Switch the direction of the electric
wire as below. Take out the
COVER WIRE HINGE, L from
the inside of the CAB CABI, and
rejoin it with the electric wire.
Make sure the length of the
electric wire is more than 150mm.
8. Switch the position of the
SHAFT upside down on the
other side of the ASSY HINGE
UPP. After detaching the
SHIM, reattach it on the other
side of the HINGE UPP
9.
After rejoining the COVER WIRE HINGE,
L and the ASSY HINGE UPP and
switching the position of the GROMMET
HINGE and the CAP SPACE DOOR
reposition the ASSY HINGE UPP and
cover the COVER WIRE DOOR as
shown. (The electric wire should be
inside of the COVER WIRE DOOR)
10.
Switch the position of the
STOPPER DOOR and
the GROMMET HINGE as
shown.
11. After unscrewing and
removing two bolts,
disassemble the ASSY
HINGE MID.
12. Disassemble the Freezer
Door by lifting it upward.
Be careful not to drop and
scratch the Freezer Door.
13. Remove the COVER
LEG FRONT COVER by
removing the screws.
14. After tilting backward the refrigerator slightly for the
convenience of the operation, disassemble the ASSY
HINGE LOW as shown and put the AUTO GUIDE
upside down, switch the position of the SHAFT.
COVER LEG
FRONT COVER
ASSY HINGE
LOW
AUTO GUIDE
When joining, tighten a screw not to make
unpredicted noise.
Note
