Bedienungsanleitung Samsung S20B300N (Seite 52 von 92) (Englisch)

591769

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Troubleshooting 5-2

The color is weird / The picture is displayed in black and white

Is the entire screen displayed in the same color as if viewing

the screen through a cellophane paper?

Check the cable connection to the computer.

Reinsert the graphics card into the computer completely.

Is the graphics card configured correctly? Set up the graphics card referring to the user manual.

The display area suddenly moves to an edge or to the center.

Did you change the graphics card or the driver?

Please press the [AUTO] button to run the auto adjustment

function.

Did you change the resolution and frequency appropriate to

the product?

Set the resolution and the frequency to the appropriate values

in the graphics card

refer to the (Standard Signal Mode Table)

Is the graphics card configured correctly? Set up the graphics card referring to the user manual.

The pictures are out-of-focus.

Did you change the resolution and the frequency appropriate

to the product?

Set the resolution and the frequency to the appropriate values

in the graphics card

refer to the (Standard Signal Mode Table)

The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card.

Did you install the device driver for the product?

Windows XP : Set the color again by selecting Control Panel

→ Appearance and Themes → Display → Settings.

Windows ME/2000 : Set the color again by selecting Control

Panel → Display → Settings.

Windows Vista : Change the color settings by selecting Con-

trol Panel → Appearance and Personalization → Personaliza-

tion → Display settings.

Windows 7 : Change the color settings by selecting Control

Panel → Appearance and Personalization → Display →

Adjust resolution → Advanced settings → Monitor.

Windows 8 : Change the color settings by selecting Settings

→ Control Panel → Appearance and Personalization → Dis-

play → Adjust resolution → Advanced settings → Monitor.

(For more information, refer to the Windows user manual for

the computer.)

Is the graphics card configured correctly?

Configure the color again in accordance with the new graph-

ics card driver.

When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed.

Did you install the device driver for the product?

Install the device driver referring to the descriptions about the

driver installation.

Check if all the Plug&Play (VESA DDC) functions are sup-

ported referring to the User Manual of the graphics card.

Install the device driver referring to the descriptions about the

driver installation.

When I look at the exterior edges of the product, small alien substances appear on it.

Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black

edges, such things may be seen. This is not a defect of the product.

A “beep, beep” sound is heard when booting the computer.

If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung S20B300N Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung S20B300N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info