Bedienungsanleitung Samsung Sam4S ER-380 (Seite 5 von 102) (Englisch)

53812

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

SAM4S ER-380 SERIES 1-1

1 Precaution Statements

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as

electrical shock.

1-1 Safety Precautions

1. Be sure that all built-in protective devices are

replaced. Restore any missing protective shields.

2. When reinstalling the chassis and its assemblies,

be sure to restore all protective devices, including

nonmetallic control knobs and compartment

covers.

3. Make sure there are no cabinet openings through

which people - particularly children - might insert

fingers and contact dangerous voltages.

Such openings include excessively wide cabinet

ventilation slots and improperly fitted covers and

drawers.

4. Design Alteration Warning:

Never alter or add to the mechanical or electrical

design of the SECR. Unauthorized alterations

might create a safety hazard. Also, any design

changes or additions will void the manufacturer’s

warranty.

5. Components, parts and wiring that appear to have

overheated or that are otherwise damaged should

be replaced with parts that meet the original

specifications. Always determine the cause of

damage or over- heating, and correct any potential

hazards.

6. Observe the original lead dress, especially near the

following areas : sharp edges, and especially the

AC and high voltage supplies.

Always inspect for pinched, out-of-place, or frayed

wiring. Do not change the spacing between comp-

onents and the printed circuit board. Check the

AC power cord for damage. Make sure that leads

and components do not touch thermally hot parts.

7. Product Safety Notice:

Some electrical and mechanical parts have special

safety-related characteristics which might not be

obvious from visual inspection.

These safety features and the protection they give

might be lost if the replacement component differs

from the original - even if the replacement is rated

for higher voltage, wattage, etc.

Components that are critical for safety are

indicated in the circuit diagram by shading, (

)

or (

). Use replacement components that have

the same ratings, especially for flame resistance

and dielectric strength specifications. A

replacement part that does not have the same

safety characteristics as the original might create

shock, fire or other hazards.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer.

Dispose used batteries according to the manufacturer’s

instructions.

ATTENTION

ll y a danger d’explosion s’il y a remplacement incorrect

de la batterie.

Remplacer uniquement avec une batterie du même

type ou d’un type équivalent recommandé par le

constructeur.

Mettre au rebut les batteries usagées conformément aux

instructions du fabricant.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung Sam4S ER-380 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung Sam4S ER-380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info