SAM4S NR-500 Series Manual Service Mode Programming • 99
RS232C Settings Screen Program Notes
Option Description
BAUD RATE
Select 1200, 2400, 4800, 9600, 19200, 38,400,
57,600, or 115,200 from the screen, 9600 is default.
PARITY
Select NONE, EVEN or ODD, NONE is default.
DATA BITS
Select 8 or 7 from the screen, 8 is default.
STOP BITS
Select 1 or 2 from the screen, 1 is default.
DEVICE FUNCTION
Select NONE, PC, PRINTER, SCANNER, POLE or
SCALE from the screen, NONE is default.
PRINTER TYPE
Select the printer type connected to this port.
DISPLAY
Select the pole display type connected to this port.
SCALE
Select the scale type connected to this port.
KP START LINE (0-20)
Enter the number of KP START LINE.
KP END LINE (0-20)
Enter the number of KP END LINE.
SLIP START LINE (0-20)
Enter the number of SLIP START LINE.
USB Setting
1. At the SERVICE MODE, press 5 and CASH for DEFINE PORT.
2. From the DEFINE PORT screen, press 3 and CASH for USB TYPE.
3. Press the ↑ key and the ↓ key to select usb type and press the CASH key to
confirm
USB TYPE
DEVICE: MEMORY
MEMORY
Note: If you select other types, Your NR-500 series will be rebooted by itself.
USB Specifications
USB TYPE USB VERSION SPEED
PC-COM For connecting PC - -
SCANNER For using scanner USB 2.0
(only HID type)
FULL SPEED
only
MEMORY For backup & restore USB 2.0 FULL SPEED
