Bedienungsanleitung Samsung Sam4S SPS-345 (Seite 3 von 291) (Englisch)

630506

Zoom out

Zoom in

Vorherige Seite

1/291

Nächste Seite

 3

Precaution Statements

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as

electrical shock.

1-1 Safety Precautions

1. Be sure that all built-in protective devices are

replaced. Restore any missing protective shields.

2. When reinstalling the chassis and its assemblies, be

sure to restore all protective devices, including

nonmetallic control knobs and compartment

covers.

3. Make sure there are no cabinet openings through

which people - particularly children - might insert

fingers and contact dangerous voltages. Such

openings include excessively wide cabinet

ventilation slots and improperly fitted covers and

drawers.

4. Design Alteration Warning:

Never alter or add to the mechanical or electrical

design of the SECR. Unauthorized alterations

might create a safety hazard. Also, any design

changes or additions will void the manufacturer’s

warranty.

5. Components, parts and wiring that appear to have

overheated or that are otherwise damaged should

be replaced with parts that meet the original

specifications. Always determine the cause of

damage or over- heating, and correct any potential

hazards.

6. Observe the original lead dress, especially near the

following areas: sharp edges, and especially the

AC and high voltage supplies. Always inspect for

pinched, out-of-place, or frayed wiring. Do not

change the spacing between components and the

printed circuit board. Check the AC power cord

for damage. Make sure that leads and components

do not touch thermally hot parts.

7. Product Safety Notice:

Some electrical and mechanical parts have special

safety-related characteristics that might not be

obvious from visual inspection. These safety

features and the protection they give might be lost

if the replacement component differs from the

original - even if the replacement is rated for

higher voltage, wattage, etc.

Components that are critical for safety are

indicated in the circuit diagram by shading, (

)

or ( ). Use replacement components that have

the same ratings, especially for flame resistance

and dielectric strength specifications. A

replacement part that does not have the same safety

characteristics as the original might create shock,

fire or other hazards.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recomm-

ended by the manufacturer.

Dispose used batteries according to the manufacturer’s

instructions.

ATTENTION

ll y a danger d’explosion s’il y a remplacement

incorrect de la batterie.

Remplacer uniquement avec une batterie du même type

ou d’un type équivalent recommandé par le

constructeur.

Mettre au rebut les batteries usagées conformément aux

instructions du fabricant.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung Sam4S SPS-345 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung Sam4S SPS-345

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info