Bedienungsanleitung Samsung SCB-9051 (Seite 8 von 19) (Englisch)

621339

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Thermal Night Vision Camera User Guide

Interface

Attach the lens cap before storing this device.

Ensure that the storage area is kept within the allowable temperature range listed in this

device’sproductspecifications.Donotplacethisdeviceinalocationwherecondensation

may occur.

A user interface terminal block is attached to the inside of this device.

Aftermakingadjustmentstotheinternalterminalblock,ensurethatthebackcoveris

properly attached.

3.AlwayscarryoutanNUCwheneversunlightorhightemperatureobjectsarewithinthe

field of view.

4. When the camera is used continuously for a long period of time, pay attention to the

buildup of dirt on the lens. A dirty lens may result in phenomena such as shortened

detection distances.

5. Even if the same item is being monitored, changes in environmental conditions such as

rain and fog will affect detection distance. While operating the camera be aware of how

such changes may influence detection distance.

External communications cable RS485 control terminal

(+) CONNECTION TERMINAL (TRX+) 485+

(-) CONNECTION TERMINAL (TRX-) 485-

Storage

Installing the Camera

UsingRS485communications,functionsettingsmenuscanbeadjustedusingtheSamsung

TechwinDVRorSystemcontroller.

(1) Controlling menus using a PC

Using an RS485 converter, connect the camera's RS485 control terminal to a serial cable.

Example) PC serial board (COM1)



serial cable



RS485 converter



camera RS485 control

terminal

(2) Controlling menus using a DVR system controller

ConnectanRS485cable(TRX+,TRX-)toanRS485controlboardconnectionterminalcapableof

connecting to the DVR system controller.

■RS485 Communications Controls

Communications Settings Default Values (camera default values at the time of shipment)

•

Please use Samsung Techwin Protocol or Pelco-D Protocol when controlling the camera

with a separate controller.

Notes

• Leakage may occur if the back cover is not properly attached.

Notes

After thermal images appear, the camera will begin to monitor its range of coverage.

1.Donotadjustthefocusifthereisnoparticularpointoffocustomonitor.

2.Foranin-depthexplanationofthecontrolsusedwiththeSCB-9050/9051,refertothe

section detailing how the camera is operated on page 16.

Duringmonitoring,theSCB-9050/9051willcaptureheatsourcesanddisplaytheresulting

images on the monitor.

1.Ifthesubjectenvironmentexperiencesadramaticchangeintemperatureduring

monitoring,besuretosetNUCMODEtoeitheranINTERVALof10MINorless,oranAMB

of 1.0°C or lower .

2. Please be aware that because this is an infrared camera, reflections not visible to the

naked eye may still be displayed. Images reflected off glass or mirrors located in front of

the camera may become visible.

Interface

Monitoring Guidelines

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SCB-9051 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info