Bedienungsanleitung Samsung SDH-V5100 (Seite 67 von 147) (Englisch)

621369

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

English _67

● MAIN MENU

•IP Address, Gateway, Subnet Mask, and DNS

- For <Static> : You can directly input IP Address, Gateway,

Subnet Mask and DNS.

- For <DHCP> : IP Address, Gateway, and Subnet Mask

are set automatically.

- For <PPPoE> : IP Address, Gateway, and Subnet Mask

are set automatically.

•ID, Password : In case you selected PPPoE, provide the

“ID” and its “Password”.

` DNS server for <DHCP> and <PPPoE> can be set by user only if you selected <Manual>.

6. When the connection setup is done, press <OK>.

Setting the Port

1. Use the up/down buttons (▲▼) in <Network> window to

move to <Connection Mode>, and press [ENTER]

button.

2. Select <Port>.

3. Use direction buttons (▲▼_ +) to move to a desired item,

and set the value.

•Protocol Type : Select the protocol type between TCP and

UDP.

- TCP : If compared to UDP, TCP connection is more stable

but slow. Recommended for Internet connection.

- UDP : If compared to TCP, UDP connection is less stable but fast. Recommended for use in LAN

environment.

If selected UDP, selections of Device Port, UDP Port and Unicast/Multicast are activated.

If setting the connection mode to PPPoE, you cannot select UDP for the protocol type.

•Device Port : Initially, <4520~4524> is set. It increases / decreases by 5.

- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet

environments.

•UDP Port : Initially, <8000~8160> is set. It increases / decreases by 160.

•Unicast/Multicast : Select one between UDP-Unicast and UDP-Multicast.

If selected Multicast, Multicast IP and TTL are activated.

- UDP- Unicast : Transfers data packet to an individual client.

- UDP-Multicast : Allows data communication to multiple clients causing no additional traffic to the network.

•Multicast IP Address : User can directly input.

•Multicast TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.

•HTTP Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.

•Multi Browser Support : The Web Viewer can be used with a browser that supports the Silverlight.

The multi viewer can be used only if the HTTP port is set to 80, protocol type is TPC and device ports range

within 4505-4530.

This is for the Siliverlight’s security purposes.

4. When the protocol setup is done, press <OK>.

Connection Mode

Interface

Port



IP Type PPPoE



Transfer Bandwidth 600kbps

OK Cancel



IP Address 192.168.1.200



Gateway 192.168.1.1



Subnet Mask 255.255.255.0



DNS Manual 168.126.63.1



ID ID



Password

************

Connection Mode

Port

Interface



Protocol Type TCP



Device Port 4520 ~ 4524



UDP Port 8000 ~ 8160



Unicast/Multicast Unicast



Multicast IP Address 224.126.63.1



Multicast TTL 5



HTTP Port 80

* Multi Browser Support:

Device Port 4505~4530, HTTP Port 80

OK Cancel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SDH-V5100 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info