Bedienungsanleitung Samsung SDH-V5100 (Seite 126 von 147) (Englisch)

621369

126

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

126_ appendix

appendix

TROUBLESHOOTING

Symptom Countermeasures

The system does not turn on and the indicator on the

front panel does not work at all.

y Check if the power supply system is properly connected.

y Check the system for the input voltage from the power source.

y If the problem persists even after you have taken the above actions,

check the power supplier and replace it with a new one if neccessary.

Some channels display just a black screen even if

they receive video sources.

y Check if the camera connected to the system properly displays the

image. Sometimes, this problem may occur on a camera that is not

properly connected to the video source.

y Check if the camera is properly supplied with power.

y Sometimes, this problem may occur on a channel with weak video

signal from a video distributor that is connected to multiple systems. In

this case, input the video source of the camera directly into the DVR.

This may find the cause and solve the problem.

If I press the [REC] button, the REC indicator does

not flash, nor the player start recording.

y Check if there is a free space on the HDD for the recording.

y Check if the record mode is set to ON in the record mode setting.

The screen displays the logo image repeatedly. y This may occur from a problem with the main board, or the related

software is corrupt.

Contact the nearest service center for more information.

The Channel button does not work on the Live

screen.

y The Channel button does not work if the current screen is in the event

monitoring mode.

In the event monitoring screen, press the [ALARM] button to exit the

screen and select a channel.

The cursor will not move to the Start button when I

start the calendar search.

y Check if the channel and the date that you want to play are marked

with the V symbol.

Both channel and date should be checked before you can start playing

with the Start button.

When the alarm sounds, I press the [ALARM] button

to release the alarm but it does not work. The alarm

persists and I could not set it off in any way.

y Press the [MENU] button to release the alarm in the following way:

1) To release the event monitoring mode : Monitoring Mode – set the

duration of the event monitoring to Off.

2) To release the alarm sound : Event Record Mode - Alarm (Motion

Detection/Video Loss/Tampering Detection) – deactivate the alarm

sound.

3) To release the event : Event Record Mode - Alarm (Motion Detection/

Video Loss/Tampering Detection) – set the mode to Off.

No response is made even if I press the [PTZ] button

on the Live screen.

y Menu  Camera  Check if the current protocols and other settings

in the PTZ device are properly configured according to the PTZ camera.

I've found that the DVR does not recognize as many

disks as installed when I have connected multiple

external HDDs to the DVR.

y It takes time for the DVR to recognize multiple external HDDs. Try again

in a moment and if the problem (of failure to recognize as many HDDs

as connected) persists, it may occur due to a mechanical error of the

HDD installed. Try again with a different HDD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SDH-V5100 Seite 126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info