Wireless Camera
Front & Back Controls
The camera can also be powered using 3 AA batteries (not included) installed in the base. If the camera is plugged in with the AC adapter, the batteries will not be used.
The batteries are intended for short term, portable camera use.
Remotely control Night Light ON or OFF is available only when the camera is paired to the receiver.
n
`
`
Camera Antenna
Sends & receives signals to or from the receiver.
Lens/IR LED Cover
Infrared LED’s provide viewing in no/low light
conditions.
Microphone
Receives sounds for the area near the camera, and
transmits sound from the camera to the receiver.
Charging Indication LED
LED is off when there is no rechargeable battery inside
the camera base; the LED is red when the rechargeable
battery pack is charging; the LED turns off when the
rechargeable battery is fully charged.
Night Light Switch
Press to turn the night light ON or OFF.
Alternatively, press the light button on the receiver to
remotely turn the camera light ON or OFF.
Pairing Button
The pairing button is located on the back of the camera
behind by the stand mount.
DC 5V Power Input
Connect the AC power adapter to the camera.
