Menu options and default values may be changed without prior notice.
There are some functions you cannot activate simultaneously in the menu. These items are greyed out. You cannot select the grey menu items.
In general, functions in both the thumbnail display and full image display employ the same methods, while their detailed options may be different.
Items marked with
are available only when the camcorder is powered by the battery.
•
•
•
•
M
: Accessible
: Not accessible
51
iSCENE
This camcorder automatically can set the shutter speed and
aperture according to the subject and brightness for optimum
recording.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
iSCENE.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
You can also set iSCENE with the shortcut menu.
¬
page 27
Advanced recording
Submenu Items
ItemsUse
On-screen
display
Auto
Use this setting for regular recording
conditions. The camcorder automatically
adjusts the aperture value and shutter
speed for optimum recording.
-
Sports
For recording rapidly moving subjects.
Example: When recording sports.
Portrait
For recording a portrait image. Use this
setting to capture natural skin tones.
Spotlight
For recording subjects under strong light.
For example, under stage spotlights in
theaters.
Beach & Snow
Use where sunlight or the refl ection of light
is intense. Example: a beach or snow fi eld.
Food
For recording objects close-up in high
colour saturation.
Waterfall
For recording a waterfall or fountain.
[254Min]STBY
Exit
iSCENE
Sports
Portrait
Auto
52
Advanced recording
Video Resolution
You can select the resolution of a video to be recorded.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Video Resolution.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
50p indicates the camcorder will record in progressive scan mode at
50 frames per second.
25p indicates the camcorder will record in progressive scan mode at
25 frames per second.
Recorded files are encoded using Variable Bit Rate (VBR). VBR is an
encoding system that automatically adjusts the bit rate according to
the image being recorded.
High resolution images occupy more memory space than low
resolution images. If you select the higher resolution, there is less
space to record videos in the memory.
The recording times depend on the resolution of a video to be
recorded.
¬
page 33
•
•
•
•
•
Submenu Items
ItemsUse
On-screen
display
1280x720/25p
Records in 1280x720 (25p) resolution.
720x576/50p
(16:9)
Records in 720x576 (50p) resolution
with 16:9 aspect ratio.
720x576/50p(4:3)
Records in 720x576 (50p) resolution
with 4:3 aspect ratio.
[254Min]STBY
Exit
Video Resolution
720X576/50p(16:9)
720X576/50p(4:3)
1280X720/25p
53
Advanced recording
Photo Resolution
You can select the quality of photo images to be recorded.
Select the recording ( ) mode by pressing the [MODE]
button.
page 26
1
Press the [MENU] button
[Control (Left/Right)] button
Photo Resolution.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Submenu Items
ItemsUse
On-screen
display
1696x954(16:9)
Record in 1696x954 resolution.
1280x720(16:9)
Record in 1280x720 resolution.
1600x1200(4:3)
Record in 1600x1200 resolution.
800x600(4:3)
Record in 800x600 resolution.
Other devices may not display photos recorded by your camcorder if those
devices do not support high resolution.
For photo development, the higher the resolution, the finer the image quality.
The number of recordable images differs according to the photo resolution you
select.
page 33
High resolution images occupy more memory space than low resolution images.
If you select a higher resolution for your photos, you will have less space to store
photos in the memory.
Resolutions marked with are the resolutions of photos to be recorded when you
set video resolution to 720X576/50p (4:3).
•
•
•
•
•
White Balance
Using the White Balance function, you can select a setting that
matches the light illuminating the subject you are shooting (Daylight,
Fluorescent, etc.) or let the camcorder make all adjustments
automatically. Based on your selection, the camcorder automatically
adjusts the colour of the subject so the colours in your recording
look natural.
Select the recording ( ) mode by pressing the [MODE]
button.
page 26
1
Press the [MENU] button
[Control (Left/Right)] button
White Balance.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Understanding White Balance
The White Balance (WB) process removes unrealistic colour casts
so that white objects are rendered white in your image and all other
colours look natural. Proper white balance has to take into account
the ‘colour temperature’ of a light source, which refers to the relative
warmth or coolness of white light.
[254Min]STBY
Exit
White Balance
Daylight
Cloudy
Auto
[254Min]STBY
Exit
Photo Resolution
1280X720(16:9)
1696X954(16:9)
54
Advanced recording
To set the white balance manually
1
Select Custom WB.
The indicator (
) and message
Set White Balance appear.
2
Frame a white object such as a
piece of paper so as to fill the
screen. Use an object that is not
transparent.
If the object filling the screen is
not focused, correct the focus
using Focus: Manual.
¬
page 57
3
Press the [Control (OK)] button.
The camcorder applies the
stored white balance the next time you record.
4
Press the [MENU] button to exit the menu.
A subject can be recorded under various types of lighting conditions
indoors (natural, fluorescent, candlelight, etc.). Because the colour
temperature is different depending on the light source, the subject's
tint will differ, affecting the subject's white balance. Use this function
to correct the white balance and provide a more natural result.
When you set white balance manually, the object you frame must
be white. Otherwise your camcorder may not detect an appropriate
setting value.
The adjusted setting remains until you set the white balance again.
During normal outdoor recording, setting to Auto may provide better
results.
Cancel the digital zoom function for clear and precise setting.
Reset the white balance if light conditions change.
•
•
•
•
•
•
•
•
•
Submenu items
ItemsUse
On-screen
display
Auto
To let the camcorder adjust the white
balance automatically according to
the lighting conditions.
-
Daylight
For recording in clear, outdoor
lighting.
Cloudy
For recording in the shade or cloudy
weather.
Fluorescent
For recording under white fl uorescent
lights.
Tungsten
For recording under halogen lamps
and incandescent lights.
Custom WB
Lets you manually adjust the white
balance to match the light source or
situation.
[254Min]STBY
Set White Balance
9999
OK
Exit
White thick paper
55
Advanced recording
Face Detection
Face Detection detects and recognises face-like shapes and adjusts
focus, colour, and exposure automatically. Also, it adjusts recording
conditions so that they are optimised for the face detected.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Face Detection.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
To exit the menu, press the [MENU] button.
Examples of the Face detection mode
When you set Face detection to On, the face detection frame
appears around faces as shown in the figure below.
The camcorder can detect up to three faces.
[254Min]STBY
9999
1/50
The Face Detection indicator ( ) and Face Detection frame ( )
are not recorded.
When Face Detection frames a face, it also adjusts the focus and
exposure to optimal values for that face automatically.
Face Detection may not operate depending on the recording
conditions. For example, the Face Detection frame may appear on a
'face-like' shape, even when the subject is not a person's face. If this
occurs, turn off the Face Detection function.
The Face Detection frame will not work on the side of a person's
face or if the illumination is too low. You must be facing subjects
‘head-on’ and have enough illumination.
You can also set the face detection with the shortcut menu.
¬
page 27
•
•
•
•
•
Submenu Items
ItemsUse
On-screen
display
Off
To disable the function.
-
On
To detect faces automatically and set the optimal
recording values.
[254Min]STBY
Exit
Face Detection
On
Off
56
Advanced recording
EV (Exposure Value)
The camcorder usually adjusts the exposure automatically.
You can also manually adjust the exposure to your preference.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
EV.
2
Press the [Control (OK)] button.
3
Press the [Control (Left/Right)]
button to adjust the exposure while
viewing the image on the LCD
screen.
EV values (
): -2.0, -1.6, -1.3,
-1.0, -0.6, -0.3, 0, +0.3, +0.6,
+1.0, +1.3, +1.6, +2.0
4
Confirm your selection by pressing the [Control (OK)] button.
The camcorder will apply the exposure value setting and the
indicator (
) and setting value appear.
To cancel the adjusted exposure value manually, select 0 in
Step 3.
•
•
•
Understanding EV (Exposure Value)
Exposure value is the total amount of light allowed to fall on the
photographic media (Image sensor) during the process of taking
photos or videos. The higher the number, the greater the exposure.
For example, + 0.3 lets in more light than -0.3.
Darker (-)Brighter (+)
0.0
You can also set EV with the shortcut menu.
¬
page 27
[254Min]STBY
Exit
EV
Adjust
[254Min]STBY
9999
0.0
EV
57
Advanced recording
C.Nite
You can adjust the shutter speed when recording a slow moving
object or a brighter image in dark places without compromising
colours.
Select the recording ( ) mode by pressing the [MODE]
button.
page 26
1
Press the [MENU] button
[Control (Left/Right)] button
C.Nite.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
When you use C.Nite, the image takes on a slow motion like effect. In
addition, the focus adjusts slowly and white dots may appear on the
screen. This is not a defect.
Focus
When you turn the camcorder on, focus is always set to automatic.
You can also set the focus manually.
Select the recording ( ) mode by pressing the [MODE]
button.
page 26
1
Press the [MENU] button
[Control (Left/Right)] button
Focus.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Submenu Items
ItemsUse
On-screen
display
Auto
In most situations, it is better to use the automatic
focus feature, as it enables you to concentrate on
the creative side of your recording.
-
Manual
To focus manually. Manual focusing may be
necessary under certain conditions that make
automatic focusing diffi cult or unreliable.
Submenu Items
ItemsUse
On-screen
display
Off
To disable the function.-
On
To record a brighter image by extending the
low shutter speed range to 1/25 or 1/13.
[254Min]STBY
Exit
Focus
Manual
Auto
[254Min]STBY
Exit
C.Nite
On
Off
58
Advanced recording
Adjusting the focus manually
This camcorder automatically focuses subjects from close-up to
infinity. However, the correct focus may not be obtained depending
on the recording conditions. In this case, use the manual focus
mode.
1
Press the [Control (Up/Down)]
button to select Manual.
The manual focus adjustment
indicator appears.
2
Press the [Control (Left/Right)]
button to select the desired
indicator to adjust focus, and then press the [Control (OK)]
button.
The manual focus setting will be applied and the (
)
indicator appears.
Focusing on a nearer or farther subject
To focus on a nearer subject, press the [Control (Left)] button.
To focus on a further subject, press the [Control (Right)] button.
The nearer or further icon (
/ ) appears between the
indicators when focus adjustment reaches the end.
The adjusted value is applied right after you press the [Control
(Left/Right)] button to adjust the focus.
<Further subject>
<Nearer subject>
•
•
•
•
Examples of the Manual focus mode
When the subject is dark.
When the background is too bright.
When you view the subject through a window that is stained or
wet.
When the subject has dense horizontal or sloping stripes.
When the subject is distant and behind a nearby wire fence.
Walls, atmosphere and other low-contrast subject.
When the subject is emitting or reflecting strong light.
When you are focusing on a subject near the boundary of the
frame.
•
•
•
•
•
•
•
•
You can also adjust the focus with the shortcut menu.
¬
page 27
Manual focusing focuses on a point in the framed scene while auto
focusing focuses on the centre area automatically.
The Auto Focus (AF) setting is useful when you operate the zoom
function because you might not be able to keep accurate focus after
the zoom ratio has been changed.
Before focusing manually, check if the Digital Zoom is turned off.
When Zoom Type is set to Digital Zoom, manual focusing will not
focus with accuracy.
¬
page 61
•
•
•
•
[254Min]STBY
9999
Manual
59
Advanced recording
Anti-Shake(HDIS)
Use the Anti-Shake(HDIS) function to compensate for unstable
images caused by shaking movements while holding the camcorder.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Anti-Shake(HDIS).
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Use the Anti-Shake function in the following cases
When recording while using the zoom extensively.
When recording a close up picture of a small object.
When recording while walking, or in a moving car.
•
•
•
The camcorder automatically activates the Anti-Shake(HDIS)
function in the Smart Auto mode.
Gross camcorder shake may not be entirely corrected even if Anti-
Shake(HDIS) is On. Firmly hold the camcorder with both hands.
When this function is On, the actual movement of the subject and
the movement displayed on the screen may be slightly different.
When recording in dark lighting at high magnification while
this function is On, after-images may stand out. In this case,
we recommend using a tripod (not supplied) and turning Anti-
Shake(HDIS) to Off.
•
•
•
•
Submenu Items
ItemsUse
On-screen
display
Off
To disable the function.-
On
To enable the Anti-Shake(HDIS) function to
compensate for shaking movements.
[254Min]STBY
Exit
Anti-Shake(HDIS)
On
Off
60
Advanced recording
Digital Special Effect
Using the digital special effect function gives your recording a
creative look.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)]button
p
Digital Special Effect.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Examples of 7 digital effect options
Off
Disables the function.
Blk&Wht ( )
This mode changes the image into black and
white.
Sepia ( )
This mode gives images a reddish brown
pigment.
Negative ( )
This mode reverses the colours and the
brightness and creates a negative look.
Dazzle ( )
This mode creates a brighter image by increasing
colour saturation.
Noir ( )
This mode creates a stronger image by
increasing contrast.
Western ( )
This mode creates a faded and old film vintage
look.
[254Min]STBY
Exit
Digital Special Effect
Blk&Wht
Sepia
Off
61
Advanced recording
Zoom Type
The camcorder offers three types of zoom: optical, intelligent, and
digital zoom.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Zoom Type.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Digital zoom range
[254Min]STBY
The right side of the bar shows the digital zooming zone. The zooming
zone appears when you move the [Zoom] lever or [Zoom] button.
9999
1/50
With the digital zoom, the image is digitally processed more than the
intelli or optical zoom modes. As a result, the image resolution may
deteriorate. The image quality may deteriorate depending on how
much you zoom in on the subject.
The zoom range will change depending on the aspect ratio of the
video.
•
•
Submenu Items
ItemsUse
Optical Zoom
To use optical zoom, up to 52X.
Intelli Zoom
The camcorder zooms the full width of the
image sensor to obtain a larger zoom range
without any deterioration in image quality.
Intelli-zoom is available up to 65X.
•
•
Digital Zoom
When this option is selected, the camcorder will
automatically switch to the digital zoom if you
zoom in beyond the optical or intelligent zoom
range.
Digital zoom is available up to 130X.
•
•
[254Min]STBY
Exit
Zoom Type
Intelli Zoom
Digital Zoom
Optical Zoom
62
Advanced recording
Cont. Shot
The Continuous Shot function allows you to capture photos in
rapid succession to give you more photo-taking opportunities when
recording moving subjects.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)]button
p
Cont. Shot.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
The number of recordable photos depends on the photo’s resolution
and the memory space.
If an error occurs (Card full, etc.) during continuous shot, the
recording stops and an error message appears.
•
•
Submenu Items
ItemsUse
On-screen
display
Off
To record only one photo image.-
On
While you are pressing the [PHOTO] button,
the camcorder can take up to 30 photos
continuously.
[254Min]STBY
Exit
Cont. Shot
On
Off
63
Advanced recording
Time Lapse REC
Using the Time Lapse feature, you can programme your camcorder
to create a time lapse video by recording a series of frames over a
set period of time with a set time interval between each frame. The
Time Lapse feature lets you create time lapse videos of blooming
flowers and similar subjects.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
To record in the Time Lapse REC mode, you must set the
recording interval between frames (Interval) using the menu.
•
•
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Time Lapse REC.
2
Press the [Control (Up/Down)]
button to select On, then press the
[Control (OK)] button.
The recording interval and total
recording time items appear.
3
Set the desired recording interval
(Sec) with [Control (Up/Down)]
button.
•
4
Move to the next setting (Hr) by pressing the [Control (Left/
Right)] button, and then set the desired total recording time in
the same way.
5
Press the [Control (OK)] button to finish the setting, and then
press the [MENU] button to exit the menu.
6
After setting the Time Lapse REC mode, press the [Recording
start/stop] button.
The Time Lapse REC starts.
Depending on the selected total recording time and recording
interval, image frames are captured by each scene.
During Time Lapse recording, the C.Nite function does not work.
•
•
Submenu items
ItemsUse
On-screen
display
Off
To disable the function.
-
On
Interval (Sec): To set the time interval between
image captures.
1
p
3
p
5
p
10
p
15
p
30 (Seconds)
REC Limit (Hr): To set the total time of
recording.
24
p
48
p
72
p
∞
(Hours)
•
•
[254Min]STBY
Exit
Time Lapse REC
On
Off
: 1 Sec
24 Hr
Move
[254Min]STBY
Exit
Time Lapse REC
On
Off
1 Sec
24 Hr
OK
Hr
= 28 Min 48 Sec
1
Sec /
24
64
Advanced recording
Example of Time Lapse Recording
Total time for recording
Recording interval
Timeline
Time for recording on the
storage media (a video of the
Time Lapse Recording)
The Time Lapse Recording function records image frames at
a predefined interval over the total recording time to produce a
time-lapse video.
For example, the Time Lapse Recording is useful for filming in
the following situations:
- Blooming flowers
- A bird building a nest
- Clouds rolling by in the sky
0:00:10/0:00:55
100-0001
0:00:20/0:00:55
100-0001
0:00:30/0:00:55
100-0001
0:00:00/0:00:55
100-0001
Time Lapse Recording mode is released once recording has been finished. To start another Time Lapse Recording, repeat steps 1 to 6 on the previous page.
According to the video resolution, 50 or 25 captured images compose a video of 1 second length. Since the minimum length of a video that your camcorder can save
is one second, the interval defines the total minimum recording time for the Time Lapse Recording. For example, if you set the interval to 30 Sec, you need to set the
recording time for the Time Lapse Recording to at least 25 or 13 minutes to record a minimum video length of 1 second (50 or 25 images).
Press the [Recording start/stop] button if you want to stop the Time Lapse Recording.
Audio is not recorded during time lapse recording.
The maximum continuous recording time is under 20 minutes. The maximum video file size is 1.8GB. When a video recording time is more than 20 minutes or a video
file exceeds 1.8GB, a new video file is created automatically.
If the battery charge is exhausted during time lapse recording, the camcorder saves recording up to that point and switches to standby mode. After a while, it displays a
warning message, then turns off automatically.
If the storage media becomes full during time lapse recording, the camcorder switches to the standby mode after saving the recording up to the maximum memory
available.
We recommend using the power adaptor for a Time Lapse Recording instead of the battery.
When a time lapse recording starts, the message of Time Lapse Recording will blink even if you switch the information display mode to the minimum display mode.
This is normal operation. Do not remove the power source or memory card from the camcorder.
•
•
•
•
•
•
•
•
•
65
Advanced recording
Guideline
This camcorder provides 3 types of guidelines to help you to set a
balanced image composition on the screen.
Select the recording ( ) mode by pressing the [MODE]
button.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Guideline.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Positioning a subject at the cross point of a guideline provides a
balanced composition.
Guidelines are not recorded.
•
•
Submenu Items
ItemsUse
On-screen
display
Off
To cancel the guideline function.-
Cross
Use when focusing a subject in the centre.
Grid
Use when recording a subject in a
horizontal or vertical composition or
shooting with the tele macro function.
Safety Zone
Positioning subjects within the Safety
Zone rectangle ensures they will be
recorded.
[254Min]STBY
Exit
Guideline
Cross
Grid
Off
67
Advanced playback
PlayOption
You can set a specific playback style according to your preference.
Press the [MODE] button to select the playback () mode.
¬
page 26
Select the video thumbnail view.
¬
page 42
•
•
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
PlayOption.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
Smart BGM Option
You can play back a video with background music by selecting the
desired background.
Press the [MODE] button to select the playback () mode.
¬
page 26
This function is available in the video single view only.
•
•
1
Press [MENU] button
p
[Control
(Left/Right)] button
p
Smart BGM Option.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit the menu.
To play back the selected background music with a video,
press the [SMART BGM] button when the video plays back.
To stop the background music, press the [SMART BGM]
button again.
When you change a background music by pressing the [MENU] button
while the video is playing back, the video will be paused. Press the [Control
(OK)] button to play back the paused video again with the changed
background music.
•
Submenu Items
ItemsUse
On-screen
display
Play All
To play back from the selected video to the
last video.
Play One
To play back the selected video only once.
Repeat All
To play back all videos repeatedly.
A
Repeat One
To play back the selected video repeatedly.
Submenu Items
ItemsUse
The Flea Waltz
To play back The Flea Waltz.
Canon in D
To play back Canon in D.
Cello Suite No.1
To play back Cello Suite No.1.
Nocturne
To play back Nocturne.
Random
To play back from The Flea Waltz to Nocturne
randomly.
Normal
Exit
PlayOption
Play One
Repeat All
Play All
A
Exit
Smart BGM Option
Canon in D
Cello Suite No.1
The Flea Waltz
0:00:01/ 0:00:06
68
Advanced playback
Delete
You can erase your recordings one by one or all at once.
Press the [MODE] button to select the playback () mode.
page 26
Select the video or photo thumbnail view.
page 42
•
•
1
Press the [MENU] button
[Control (Left/Right)] button
Delete.
2
Select an option by pressing the
[Control (Up/Down)]button, and
then press the [Control (OK)] button.
3
If you selected Select Files, image
thumbnails will appear.
ⓐ
Use the [Control (Up/Down/
Left/Right)] button to move to
the photo or video you want to
delete.
ⓑ
Press the [Control (OK)] button
to mark images for deletion. The garbage can icon
()
appears on the photo or video.
ⓒ
Repeat Steps
ⓐ
and
ⓑ
for each photo or video you want to
delete.
ⓓ
Press the [MENU] button to delete the photos and videos
you selected.
ⓔ
The message corresponding to the selected option appears.
Use the [Control (Left/Right)] button to select Yes, and then
press the [Control (OK)] button.
4
If you selected All Files, the message corresponding to the
selected option will appear. Use the [Control (Left/Right)]
button to select Yes, and then press the [Control (OK)] button.
Deleted images cannot be recovered.
Do not remove the power adaptor or memory card while deleting
fi les, otherwise the storage media may be damaged.
•
•
You can also delete your recordings in the single view.
To protect important images from accidental deletion, activate image
protection.
page 69
Protected images cannot be deleted. To delete a protected image,
cancel the protect function fi rst.
page 69
If the write protection tab on a memory card is set to lock, you
cannot delete.
You can also format the storage media to delete all the images at
once. Be aware that all fi les and data including protected fi les will be
erased.
page 76
The Delete function does not operate if the battery charge is
insuffi cient. We recommend you use the power adaptor to avoid
power-loss while deleting.
•
•
•
•
•
•
Submenu Items
ItemsUse
Select Files
To delete the selected videos or photos.
All Files
To delete all videos or photos, except for the
protected fi les.
Normal
Exit
Delete
All Files
Select Files
Delete
1/10
DeleteMoveCancel
0:00:55
69
Advanced playback
Protect
You can protect important saved videos or photos from accidental
deletion. You cannot delete protected images unless you release the
protection or format the memory.
Press the [MODE] button to select the playback () mode.
¬
page 26
Select the video or photo thumbnail view.
¬
page 42
•
•
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Protect.
2
Select an option by pressing the
[Control (Up/Down)]button, and
then press the [Control (OK)]
button.
3
If you selected Select Files, image
thumbnails will appear.
ⓐ
Use the [Control (Up/Down/
Left/Right)] button to move to
the photo or video you want to
protect.
ⓑ
Press the [Control (OK)] button
to mark images for protection. The key icon
( )
appears
on the photo or video.
ⓒ
Repeat Steps
ⓐ
and
ⓑ
for each photo or video you want to
protect.
ⓓ
Press the [MENU] button to protect the photos and videos
you selected.
ⓔ
The message corresponding to the selected option appears.
Use the [Control (Left/Right)] button to select Yes, and then
press the [Control (OK)] button.
4
If you selected All On, the message corresponding to the
selected option will appear. Use the [Control (Left/Right)]
button to select Yes, and then press the [Control (OK)] button.
5
If you selected All Off, the message corresponding to the
selected option will appear. Use the [Control (Left/Right)]
button to select Yes, and then press the [Control (OK)] button.
You can also protect you recordings in the single view.
If the write protection tab on a memory card is set to lock, you
cannot set image protection.
¬
page 31
•
•
Submenu Items
ItemsUse
Select Files
To protect the selected videos or photos from
deletion.
All On
To protect all videos or photos.
All Off
To cancel the protection for all videos or photos.
Normal
Exit
Protect
All On
All Off
Select Files
Protect
1/10
ProtectMoveCancel
0:00:55
70
Advanced playback
Slide Show
You can enjoy a slide show with various effects.
Press the [MODE] button to select the playback () mode.
¬
page 26
Select the photo thumbnail view.
¬
page 42
•
•
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Slide Show.
2
Select an option by pressing the
[Control (Up/Down)] button, and
then press the [Control (OK)]
button.
3
Press the [MENU] button to exit
the menu.
File Info
You can see the image information for all images.
Press the [MODE] button to select the playback () mode.
¬
page 26
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
File Info
p
[Control (OK)] button.
The file selection screen
appears.
2
Select the desired video or photo
by pressing the [Control (Up/
Down/Left/Right)] button, and
then press the [Control (OK)]
button.
The following information for the
selected file appears:
- Date
- Duration (Video only)
- Size
- Resolution
3
Press the [MENU] button to exit the menu.
•
•
Submenu Items
ItemsUse
Start
To start a slide show from the current image.
- The indicator ( ) appears.
- To stop the slide show, press the [Control (OK)] button
again.
- To return to the thumbnail view, move the [Zoom] lever.
Interval
Continuously plays back photos at the interval you select.
You can choose 1sec or 3sec.
Music
You can turn the internal background music on or off. This
camcorder has 4 default background melodies stored in the
boot-up fl ash memory. If the music is on when the slide show
starts, the 4 melodies will play back in shuffl e mode.
Normal
Exit
Slide Show
Interval
Music
Start
: On
: 1Sec
1/10
100-0001
Normal
Exit
File Info
Select Files
File Info
100VIDEO SDV_0001.MP4
Date : 01/JAN/2011
Duration : 1:23:45
Size : 22.6 MB
Resolution : 720X576/50p(16:9)
ExitOK
71
Storage Info
Storage Info displays the storage information for the storage media.
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Settings
p
[Control (Up/
Down)] button
p
Storage Info
p
[Control (OK)] button.
Press the [Control (Up/Down)]
button to move the screen up
or down and view additional
information.
You can check the used
memory, available memory, and
the available recordable time for
each recording resolution.
2
Press the [MENU] button to exit the menu.
If there is no storage media inserted, it cannot be selected and will
be dimmed on the menu.
The actual capacity may be less than the capacity displayed on the
LCD screen as the camcorder’s system fi les occupy a part of the
capacity.
•
•
•
•
File No.
The camcorder assigns file numbers to recorded files in the order
they were recorded.
1 Press the [MENU] button p
[Control (Left/Right)] button
pSettingsp [Control (Up/
Down)] button pFile No.p
[Control (OK)] button.
2 Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3 To exit the menu, press the
[MENU] button.
When you set File No. to Series, each file is assigned a different number
to avoid duplicating file names. It is convenient when you want to manage
your files on a computer.
Other settings
Storage Info
Storage : Card
Used : 190MB
Free : 14.6GB
ExitMoveBack
Submenu Items
ItemsUse
Series
Assigns fi le numbers in sequence even if you have inserted a
different memory card, formatted the card, or deleted all fi les.
The fi le number is reset only when a new folder is created.
Reset
Resets the fi
le number to 0001.
[254Min]STBY
Exit
Settings
File No.
Date/Time Set
Storage Info
Series
Reset
[254Min]STBY
Exit
Settings
File No.
Date/Time Set
Storage Info
:
72
Other settings
Date/Time Set
By setting the date and time, you can display the date and time of a
recording during playback.
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Settings
p
[Control (Up/Down)]
button
p
Date/Time Set
p
[Control (OK)] button.
2
Select the date or time information,
and change the setting values by
pressing the [Control (Up/Down/
Left/Right)] button.
3
Make sure the clock is correctly set,
and then press the [Control (OK)]
button.
The year can be set up to 2037.
Date/Time Display
You can set whether or not the date and/or time appear on the LCD
screen.
1 Press the [MENU] button p
[Control (Left/Right)] button p
Settingsp [Control (Up/Down)]
button pDate/Time Displayp
[Control (OK)] button.
2 Select the desired submenu and
menu item with the [Control
(Up/Down)] button, and then press
[Control (OK)] button.
3 Press the [MENU] button to exit
the menu.
The date/time appears on the
LCD screen according to the selected option.
When the internal battery is depleted, the date/time will read 01/
JAN/2011 00:00.
•
Submenu Items
ItemsUseOn-screen display
Off
Not to display the current date/
time.
-
Date
To display the current date.
01/JAN/2011
Time
To display the current time.00:00
Date & Time
To display the current date and
time.
01/JAN/2011
00:00
[254Min]STBY
Exit
Settings
Date/Time Display
LCD Brightness
Date/Time Set
:
12
OFF
:
[254Min]STBY
Exit
Settings
Date/Time Display
LCD Brightness
Date/Time Set
:
12
OFF
:
[254Min]STBY
Exit
Settings
Date/Time Display
LCD Brightness
Date/Time Set
12
OFF
:
Off
Date
12
OFF
Time
Date/Time Set
Day
JAN
01
20110000
YearMonthHrMin
Cancel
MoveOK
73
Other settings
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for
ambient lighting conditions.
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Settings
p
[Control (Up/Down)]
button
p
LCD Brightness
p
[Control (OK)] button.
2
Select the desired submenu and
menu item with the [Control
(Up/Down)] button, and then press
[Control (OK)] button.
3
Press the [MENU] button to exit
the menu.
If the surrounding is too bright, adjust the brightness of the LCD
screen.
Adjusting the LCD screen does not affect the image being recorded.
A brighter LCD screen consumes more power.
•
•
•
Auto LCD Off
To reduce power consumption, the brightness of the LCD screen
is automatically dimmed if the camcorder is idle for more than 2
minutes.
1 Press the [MENU] button p
[Control (Left/Right)] button p
Settingsp [Control (Up/Down)]
button pAuto LCD Offp
[Control (OK)] button.
2 Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3 Press the [MENU] button to exit
the menu.
When the Auto LCD Off function is enabled, you can press any
button on the camcorder to return LCD brightness to normal.
Auto LCD Off will be disabled in the following case:
-
If the power cable (Power adaptor, USB cable) is connected.
•
•
Submenu Items
ItemsUse
Normal
Standard brightness.
Bright
Brightens the LCD screen.
[254Min]STBY
Exit
Settings
Date/Time Display
LCD Brightness
Date/Time Set
:
12
OFF
:
[254Min]STBY
Exit
Settings
Date/Time Display
LCD Brightness
Date/Time Set
Normal
Bright
Exit
Submenu Items
ItemsUse
Off
To disable the function.
On
When the camcorder is idle for more than 2 minutes in the STBY
mode, or for more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD screen.
[254Min]STBY
Exit
Settings
Beep Sound
Shutter Sound
Auto LCD Off
LCD
:
:
:
[254Min]STBY
Exit
Settings
Beep Sound
Shutter Sound
Auto LCD Off
Off
On
Exit
LCD
LCD
74
Other settings
Beep Sound
When Beep Sound is on, the camcorder sounds a beep when you
press a button.
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Settings
p
[Control (Up/Down)]
button
p
Beep Sound
p
[Control (OK)] button.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit
the menu.
The Beep Sound function is suspended in the following cases:
- During recording and playback
- Pause while recording
- When the camcorder has a cable connection. (AV cable)
Shutter Sound
You can turn the shutter sound the camcorder emits when you
press the [PHOTO]button on or off.
1 Press the [MENU] button p
[Control (Left/Right)] button p
Settingsp [Control (Up/Down)]
button pShutter Soundp
[Control (OK)] button.
2 Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3 Press the [MENU] button to exit
the menu.
Submenu Items
ItemsUse
Off
Disables the function.
On
To have the camcorder beep every time you press a button.
[254Min]STBY
Exit
Settings
Beep Sound
Shutter Sound
Auto LCD Off
LCD
:
:
:
[254Min]STBY
Exit
Settings
Beep Sound
Shutter Sound
Auto LCD Off
Off
On
Exit
Submenu Items
ItemsUse
Off
To turn the shutter sound off.
On
To turn the shutter sound on. It will sound when you press the
[PHOTO] button.
[254Min]STBY
Exit
Settings
Beep Sound
Shutter Sound
Auto LCD Off
LCD
:
:
:
[254Min]STBY
Exit
Settings
Beep Sound
Shutter Sound
Auto LCD Off
Off
On
Exit
75
Other settings
Auto Power Off
You can set your camcorder to turn off automatically if it is idle for 5
minutes without an operation. This function will prevent unnecessary
power consumption.
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Settings
p
[Control (Up/Down)]
button
p
Auto Power Off
p
[Control (OK)] button.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit
the menu.
Auto Power Off does not work in the following situations:
- If the power cable (Power adaptor, USB cable) is connected.
- While the following functions are in operation; Delete: All Files,
Protect: All On.
- While recording, playing back (except pause), pausing while
recording, or playing back a photo slide show.
To operate the camcorder again, press the [Power (
)] button.
•
•
PC Software
If you set PC Software to On, you can use the built-in PC software
easily by connecting a USB cable between the camcorder and your
PC. Using the software, you can download stored video and photo
images on the camcorder to your PC’s hard disk. You can also edit
video and photo files using the PC software.
1 Press the [MENU] button p
[Control (Left/Right)] button p
Settingsp [Control (Up/Down)]
button pPC Softwarep
[Control (OK)] button.
2 Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3 Press the [MENU] button to exit
the menu.
PC Software is compatible with Windows operating systems only.
Submenu Items
ItemsUse
Off
To disable the function.
5 Min
The camcorder turns off if idle for 5 minutes without
performing an operation.
[254Min]STBY
Exit
Settings
PC Software
Format
Auto Power Off
:
:
[254Min]STBY
Exit
Settings
PC Software
Format
Auto Power Off
Off
5 Min
Exit
Submenu Items
ItemsUse
Off
To disable the function.
On
To launch the built-in editing software when you connect the
camcorder to a PC with a USB cable.
[254Min]STBY
Exit
Settings
PC Software
Format
Auto Power Off
:
:
[254Min]STBY
Exit
Settings
PC Software
Format
Auto Power Off
Off
On
Exit
76
Other settings
Format
Use the Format function if you want to delete all files completely or
to correct problems on the storage media.
Insert a memory card.
¬
page 30
1
Press the [MENU] button
p
[Control (Left/Right)] button
p
Settings
p
[Control (Up/Down)]
button
p
Format
p
[Control (OK)]
button.
2
Select Yes by pressing the
[Control(Left/Right)] button, and
then press the [Control (OK)] button.
Do not remove the memory card or perform any other operation
(such as turning off the power) during formatting. Also, be sure to
use the provided power adaptor, as the recording media may be
corrupted if the battery becomes exhausted during formatting.
If the storage media becomes corrupted, format it again.
•
•
Do not format the storage media on a PC or other device.
Make sure to format the storage media on this camcorder.
Format the memory card in the following cases:
- Before using a new memory card
- If the memory card was formatted on other devices
- If the memory card was used to record on other devices
- If the camcorder cannot read the memory card
A memory card with the protection tab set to lock will not be
formatted.
If there is no storage media inserted, it cannot be selected and will
be dimmed in the menu.
You cannot format when the battery power is insuffi cient. We
recommend you use the power adaptor to avoid loss of power while
formatting.
•
•
•
•
•
Default Set
You can restore all menu settings to their defaults.
1 Press the [MENU] button p
[Control (Left/Right)] button
pSettingsp [Control (Up/
Down)] button pDefault Setp
[Control (OK)] button.
2 Select Yes if you want all the
settings return to the defaults.
Do not turn off the power while using this function.
After resetting the camcorder, reset the Date/Time Set. ¬page 25
The Default Set function does not affect the fi les recorded on the
storage media.
•
•
•
Language
You can select a desired language to display the menu and
messages in. ¬page 29
[254Min]STBY
Exit
Settings
PC Software
Format
Auto Power Off
:
:
[254Min]STBY
Exit
Settings
Default Set
Language
Format
77
Connecting to a TV
CONNECTING TO A TV (16:9/4:3)
You can view images recorded with your camcorder on a regular
TV that supports standard definition. This camcorder supports the
composite output for standard definition video transfer.
Connecting an Audio/Video cable for the composite
output
1
Connect the camcorder to a TV with an Audio/Video cable.
Turn on the camcorder, and then connect an Audio/
Video cable. If you do not turn on the camcorder first, the
camcorder may fail to recognise the connected TV.
2
Set the TV’s input or source selector to the input you’ve
attached the camcorder to.
Refer to the TV’s instruction manual to see how to select the
TV input.
3
Start to play back images.
¬
page
42
•
•
VIDEOAUDIO
LR
VIDEOAUDIO
Stereo Type
Mono Type
RedYellow
White
WhiteYellow
When you connect the camcorder to a TV, the LCD screen of the
camcorder turns off automatically.
Make sure you’ve connected the camcorder to the correct input
jacks. The TV screen may not display the right image information if
connected incorrectly.
Do not use excessive force when connecting the cables.
We recommend you use the power adaptor as the power source.
When connecting to a TV using the Audio/Video cable, match the
colour of the cables to the colour of the corresponding jacks.
Video input may appear green depending on the TV. If this occurs,
connect the yellow plug of the Audio/Video cable to the green jack of
the TV.
If your TV has one audio jack (mono input), connect the yellow plug
of the Audio/Video cable to the video jack, the white plug to the
audio jack, and leave the red plug unconnected.
When you connect the camcorder to a TV using the Audio/Video
cable, images recorded in high definition image quality (1280x720/
25p) play back in standard definition image quality.
If you want to view the videos with the resolution of 1280x720/25p in
the high definition image quality, play back them via the Intelli-studio
programme on your PC.
•
•
•
•
•
•
•
•
•
CARD
TV
Camcorder
Signal flow
Audio/Video cable
78
Connecting to a TV
VIEWING ON A TV SCREEN
Image display depending on LCD and TV screen ratio
Recording ratio
Appearance on Wide
Screen (16:9) TV
Appearance on 4:3 TV
Images recorded in
a 16:9 ratio
Images recorded in
a 4:3 ratio
Adjust the volume to a moderate level. If the volume is too high, the
video may include the noise.
C
A
R
D
79
DUBBING TO VCR OR DVD/HDD
RECORDERS
You can dub images recorded on your camcorder to other recording
devices, such as VCRs or DVD/HDD recorders.
Videos are dubbed to the other recording device via analogue
data transfer. (composite connection) Use the supplied Audio/
Video cable.
Use the power adaptor to power the camcorder when you dub to
a VCR or DVD/HDD recorder.
•
•
CARD
Camcorder
VCRs or DVD/ HDD recorders
Audio/Video cable
Signal flow
1
Insert the storage media in the recording device.
2
Connect your camcorder to the recording device (VCR or DVD/
HDD recorders) with the supplied Audio/Video cable.
3
Start the playback on your camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied with your recording
device for details.
4
When dubbing finishes, stop the recording device, and then your
camcorder.
Videos recorded on this camcorder can only be dubbed using
the Audio/Video cable in SD (standard defi nition) image quality,
regardless of the recording resolution (HD/SD).
To copy a video recorded in HD (high defi nition) image quality, use
the built-in software of your camcorder, and then copy the video to
your computer.
¬
page 81
Since dubbing is performed via analogue data transfer, the image
quality may deteriorate.
To record the date/time, display it on the LCD screen.
¬
page 72
•
•
•
•
•
Dubbing videos
80
WHAT YOU CAN DO WITH A WINDOWS
COMPUTER
You can perform the following functions by connecting your
camcorder to your Windows computer with a USB cable and using
the Intelli-studio editing software built into your camcorder.
Main Functions
Intelli-studio editing software’s main functions
- Playing back recorded videos or photos.
- Editing recorded videos or photos.
- Uploading the recorded videos and photos to YouTube,
Flickr or Facebook, etc.
You can transfer or copy the fi les (videos and photos) saved on
the storage media into your computer.
•
•
System Requirements
Your computer must meet the following requirements to run Intelli-
studio:
ItemsSystem Requirements
OSMicrosoft Windows XP SP2, Windows Vista, or Windows 7
CPU
Intel
®
Core 2 Duo
®
1.66 GHz or higher is recommended
AMD Athlon™ X2 Dual-Core 2.2 GHz or higher is recommended
(Notebook: Intel Core2 Duo 2.2GHz or AMD Athlon X2 Dual-
Core 2.6GHz or higher is recommended)
RAM1GB or higher is recommended
Video Card
NVIDIA GeForce 8500 or higher,
ATI Radeon HD 2600 series or higher
Display
1024 x 768, 16-bit colour or higher (1280 x 1024, 32-bit colour
recommended)
USBUSB 2.0
Direct XDirectX 9.0c or higher
Recommended
Memory Card
4MB/s (Class 4) or above
System requirements mentioned above are recommendations. Even
on a system that satisfi es the requirements, Intelli-studio may not
operate optimally.
On a slower than recommended computer, video playback may skip
frames or operate unexpectedly.
If the version of DirectX on your computer is lower than 9.0c, install
DirectX 9.0c or higher.
We recommended you transfer recorded videos to a PC before
playing back or editing the videos.
To run Intelli-studio, a laptop computer requires faster and better
components than a desktop PC.
Intelli-studio is not Mac OS compliant.
•
•
•
•
•
•
Using with a windows computer
81
Using with a windows computer
USING THE Intelli-studio PROGRAMME
Intelli-studio is a built-in programme that allows you to play back
and edit files. You can upload files to web sites, such as YouTube or
Flickr.
Step 1. Connecting the USB cable
1
Set PC Software to On.
This is the default setting.
2 Connect the camcorder to a PC with the USB cable.
A new file saving window appears along with the Intelli-studio
main window. If your camcorder has no new files, the pop-up
window for saving new files will not appear.
Depending on your version of Windows, the Windows
removable disk window may also appear.
CARD
•
•
•
3
Click Yes in the new file saving window. The uploading
procedure starts. Click Yes to confirm.
If you do not want to save any new files, select No.
To disconnect the USB cable
To disconnect the USB cable after completing the file transfer, you
must follow these steps:
1. Click the Safely Remove Hardware icon on the taskbar.
2. Select USB Mass Storage Device, and then click Stop.
3. If the Stop a Hardware device window appears, click OK.
4. Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable. (Supplied by Samsung)
Make sure you insert the USB plug into the USB jack with the plug facing
in the correct direction.
When the USB cable is connected, turning the camcorder on or off may
cause the PC to malfunction.
If you disconnect the USB cable from the PC or the camcorder while
transferring files, the data transmission will stop and the data may be
damaged.
If you connect the camcorder to a PC via a USB HUB or simultaneously
connect the camcorder along with other USB devices, the camcorder may
not work properly. If this occurs, remove all USB devices from the PC, and
then reconnect the camcorder.
Intelli-studio may not automatically run. If this occurs, access My Computer
or Windows Explorer, open the drive that corresponds to your camcorder,
find Intelli-studio, and then run iStudio.exe.
•
•
•
•
•
•
•
82
Using with a windows computer
Step 2. About the Intelli-studio main window
When the Intelli-studio starts up, video and photo thumbnails appear
in the main window.
1
$
#
@
9
8
0
%
234567
!
If you install Intelli-studio on your PC, the programme will launch
more quickly. To install the programme, select ToolInstall Intelli-
studio on PC.
You can update the latest version of Intelli-studio software by clicking
on Web SupportUpdate Intelli-studioStart Update.
The camcorder’s built-in Intelli-studio software is intended for
home use. It is not for precision or industrial productions. For these
applications, we recommend an editing software designed for
professional use.
•
•
•
For details, select HelpHelp on the
Intelli-studio screen.
No.Description
1
Menu items
2
Display files in the selected folder.
3
Switch to Photo edit mode.
4
Switch to Video edit mode.
5
Switch to Share mode.
6
Enlarge or reduce the thumbnails in the list.
7
Select a file type.
8
View videos and photos of the selected folder on your computer.
9
Show or hide videos and photos of the connected device.
0
View videos and photos of the selected folder on the device.
!
View files as thumbnails or on a map
@
Browse folders in the connected device.
#
Browse folders stored on your computer
$
Move to the previous or next folder
%
Print files, view files on a map, store files in Contents Manager, or
register faces.
83
Using with a windows computer
Step 3. Playing back videos or photos
You can play back the recordings conveniently using the Intelli-
studio application.
1 With Intelli-studio, click the desired folder to display your
recordings.
Video or photo thumbnails appear on the screen, depending
on the folder you selected.
2 Choose the video or photo that you want to play back.
You can view the file information by moving the mouse over
the file.
If you click a video thumbnail once, the video plays back
inside the thumbnail frame, allowing you to search for a
desired scene with ease.
3 After you select the video or photo you want, double-click to
play back.
Playback starts and the controls appear.
Intelli-studio supports the following file formats:
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Samsung SMX-F700BP wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.