Bedienungsanleitung Samsung SMX-F700BP (Seite 32 von 104) (Englisch)

461720

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Getting ready to start recording

Handling a memory card

Damaged data may not be recoverable. We recommend you

make a back-up of important data separately on the hard disk of

your PC.

Turning the power off or removing a memory card during an

operation such as formatting, deleting, recording, and playback

may cause data loss.

If you modify the name of a file or folder stored in the memory

card with your PC, your camcorder may not recognise the

modified file.

The memory card does not support any data recovery mode.

Therefore, care should be taken in case the memory card is

damaged while recording.

Make sure to format the memory card on this camcorder. If

the memory card had been formatted by a PC or other device,

using it on this camcorder without formatting may find trouble

with recording and/or playback. Samsung is not responsible for

damage of recorded contents caused by such reasons.

You have to format newly-purchased memory cards, memory

cards with data that your camcorder cannot recognise or with

data saved by other devices. Note that formatting erases all data

on the memory card and deleted data cannot be recovered.

A memory card has a certain life span. If you cannot record new

data, you have to purchase a new memory card.

Do not bend, drop, or subject the card to strong impacts.

Do not place foreign substances on the memory card terminals.

Use a soft dry cloth to clean the terminals if required.

Do not paste anything other than the label provided with the card

on the label pasting area of the card.

Do not use a damaged memory card.

Be careful to keep the memory card out of the reach of children,

who might swallow it.

•

Samsung is not responsible for data loss due to misuse, including

loss caused by any PC virus.

We recommend using a memory card case to avoid data loss that

can be caused by moving the card or by static electricity.

After a period of use, the memory card may get warm. This is normal

and is not a malfunction.

•

The camcorder supports SD, SDHC, and SDXC memory

cards, giving you a wider choice of cards!

The data storage speed of cards may differ, depending on the

manufacturer and production system.

SLC (single level cell) system: faster write speed enabled.

MLC (multi level cell) system: only lower write speed is

supported.

For best results, we recommend using a memory card that

supports a faster write speed.

Using a lower write speed memory card for recording video may

cause difficulties when storing.

You may even lose your video data during the recording. In an

attempt to preserve every bit of the recorded video on a low

speed card, the camcorder forcibly stores the video on the

memory card and displays a warning:

Low speed card. Please record at a lower resolution.

If you are unavoidably using a low speed memory card, the

resolution and quality of the recording may be lower than the

value you set.

page

The higher the video resolution and quality, the more memory the

camcorder uses.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SMX-F700BP Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung SMX-F700BP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info