Bedienungsanleitung Samsung SNV-6085R (Seite 36 von 70) (Englisch)

621307

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

setup screen

36_ setup screen

2. Set the camera item for each image preset mode.

3. Set the <Activation time>.

• Off : Your camera will execute a specific image preset operation at all times.

• Only scheduled time : Your camera will execute a specific image preset operation for the time period set

by you on each date.

4. Click the [Set (

)] button.

5. Set the <Mode> and <Time>.

6. When done, click [Apply (

)].

Initial setting for each image preset mode

Image preset Minimum shutter Maximum shutter AGC SSDR SSNR3

Definition focus (Default)

When you change the profile

Default (1/5) 1/12000 Default (High) Default (12) Default (12)

Motion focus 1/30 1/12000 Default (High) Default (12) 4

Reduced noise 1/15 1/12000 Middle Default (12) Default (12)

Bright video Default (1/5) 1/12000 Default 18 Default (12)

Motion focus&Reduced noise 1/30 1/12000 Middle Default (12) 4

Motion focus&Bright video 1/30 1/12000 Default 18 4

User preset Manual Manual Manual Manual Manual

The preset setup functions as an aid to users to configure setup. If you don’t want the preset function, deactivate it before

use.

If you change the image preset, only shutter/AGC/SSDR/SSNR3 will be initialized for each mode.

The “Camera Setting” value does not change between presets.

To Set the Sensor

It specifies how many frames the camera CMOS sensor will capture per second.

1. Select <Sensor>.

2. Select <Mode>.

Refer to “Video profile” for the framerate setup range of the <Video profile> according to mode setup. (Page 30)

If the sensor mode is set to 50 fps or 60 fps, the <Back light> mode cannot be set to <WDR>.

To Set SSDR (Samsung Super Dynamic Range)

In a scene where the difference between bright and dark is severe, you can increase the brightness of the

dark area alone to regulate the overall brightness.

1. Select <SSDR>.

2. Set <Mode> to <On>.

3. Configure the <Level> and <D-Range> settings as

necessary.

• Level : Adjust the level of the dynamic range.

• D-Range : Select the amplitude area of the dynamic range.

To Set White Balance

You can correct the image colors based on white under any lighting conditions.

1. Select <White balance>.

2. Select <Mode>.

• ATW : Corrects the colors of the camera video

automatically.

• Manual : You can adjust the red and blue gains of the camera video manually.

• AWC : Corrects the colors of the camera video to be optimized to the current lighting condition and

screen mode.

To obtain the optimal condition for the current lighting, put the focus of the camera to a white paper

and press the [Set] button. If the lighting environment is changed, you should readjust the settings

accordingly.

• Outdoor : Automatically corrects the video colors of the camera to be optimized to the outdoor

environment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SNV-6085R Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info