Bedienungsanleitung Samsung SPP2020 (Seite 3 von 79) (Englisch)

19625

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

Important Safety Information

Safety Instructions

Your system is designed and tested to meet the latest standards for safety of

information technology equipment. However, to ensure safe use of this product,

it is important that the safety instructions marked on the product and in the

documentation are followed. Always follow these instructions to help guard

against personal injury and damage to your system.

Setting Up your System

• Use only with power cord of Dongyang Instrument, ADP-4024W

• Read and follow all instructions marked on the product and in the documentation

before you operate your system. Retain all safety and operating instructions for future

use.

• Do not use this product near water or a heat source such as a radiator.

• Set up the system on a stable work surface.

• The product should be operated only with the type of power source indicated on the

rating label.

• Ensure that the electrical outlet you are using to power your equipment is easily

accessible in case of fire or short circuit.

• If your printer has a voltage selector switch, make sure that the switch is in the proper

position for your area.

• Openings in the printer case are provided for ventilation. Do not block or cover these

openings. Make sure you provide adequate space, at least 6 inches (15 cm), around

the system for ventilation when you set up your work area. Never insert objects of any

kind into the printer ventilation openings.

• Ensure that the fan vents on the bottom of the casing are clear at all times. Do not

place the printer on a soft surface, doing so will block the bottom vents.

• If you use an extension cord with this system, make sure that the total ampere rating

on the products plugged into the extension cord does not exceed the extension cord

ampere rating.

Care During Use

• Do not walk on the power cord or allow anything to rest on it.

• Do not spill anything on the system. The best way to avoid spills is to not eat or drink

near your system.

• When the printer is turned off, a small amount of electrical current still flows through

the Printer. To avoid electrical shock, always unplug all power cables, before cleaning

the system.

• Unplug the system from the wall outlet and refer servicing to qualified personnel if:

-The power cord or plug is damaged.

-Liquid has been spilled into the system.

-The system does not operate properly when the operating instructions are

followed.

-The system was dropped or the casing is damaged.

-The system performance changes.

Replacement Parts and Accessories

Use only replacement parts and accessories recommended by

manufacturer.

• To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.

• Do not use this product in areas classified as hazardous. Such areas include patient

care areas of medical and dental facilities, oxygen rich environments, or industrial

areas.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung SPP2020 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung SPP2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info