Bedienungsanleitung Samsung syncmaster 920nw (Seite 62 von 78) (Englisch)

213347

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

disappears.

Please change to the recommended

mode during this one-minute period.

(The message is displayed again if

the system is rebooted.)

There is no image on the

screen.

Is the power indicator on

the monitor blinking at 1

second intervals?

The monitor is in PowerSaver mode.

press any key on the keyboard to

activate the monitor and restore the

image on the screen.

The screen shows

strange colors or just

black and white.

Is the screen displaying

only one color as if looking

at the screen through a

cellophane paper?

Check the signal cable connection.

Make sure the video card is fully

inserted in it's slot.

Have the screen colors

become strange after

running a program or due

to a crash between

applications?

Reboot the computer.

Has the video card been

set properly?

Set the video card by referring to the

video card manual.

The screen suddenly

has become

unbalanced.

Have you changed the

video card or the driver?

Adjust screen image position and

size using the OSD.

Have you adjusted the

resolution or frequency to

the monitor?

Adjust the resolution and frequency

at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals.

Readjust position by referring to the OSD.

The screen is out of

focus or OSD cannot

be adjusted.

Have you adjusted the

resolution or frequency on

the monitor?

Adjust the resolution and frequency

of the video card.

(Refer to the Preset Timing Modes).

LED is blinking but no

images on the screen.

Is the frequency properly

adjusted when checking

the Display Timing on the

menu?

Adjust the frequency properly by

referring to the video card manual

and the Preset Timing Modes.

(The maximum frequency per

resolution may differ from product to

product.)

There are only 16

colors shown on the

screen.

The screen colors

have changed after

changing the video

card.

Have the Windows colors

been set properly?

Windows ME/2000/XP:

Set the colors properly at the

Control Panel

→

Display

→

Settings

Has the video card been

set properly?

Set the video card by referring to the

video card manual.

There is a message

that reads

"Unrecognized

monitor, Plug & Play

(VESA DDC) monitor

found".

Have you installed the

monitor driver?

Install the monitor driver according

to the Driver Installation Instructions.

See the video card

manual to see if the Plug

& Play (VESA DDC)

function can be supported.

Install the monitor driver according

to the Driver Installation Instructions.

Check when

MagicTune does not

function properly.

MagicTune feature is

found only on PC (VGA)

with Window OS that

supports Plug and Play.

* To check whether your PC is

available for MagicTune feature,

follow the

steps below (When Windows is

XP);

Control Panel -> Performance and

Maintenance -> System ->

Hardware -> Device Manager ->

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung syncmaster 920nw Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung syncmaster 920nw

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info