Bedienungsanleitung Samsung T24B350 (Seite 42 von 47) (Englisch)

644182

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

English

Other Information

Issues Solutions and Explanations

There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the LED display and

external devices).

• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the

connections to the LED display input. For example, if an external device’s output is HDMI, it should be

connected to an HDMI input on the LED display.

• Make sure your connected devices are powered on.

• Be sure to select the LED display correct source by pressing the SOURCE button on the LED display

remote.

• Reboot the connected device by reconnecting the device’s power cable.

RF(Cable/Antenna) Connection

The LED display is not receiving all

channels.

• Make sure the Antenna cable is connected securely.

• Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System -

Setup (Initial setup) and wait for all available channels to be stored.

• Verify the Antenna is positioned correctly.

The picture is distorted: macro block error

small block, dots, pixelization.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such

as sports and action movies.

• A low signal can cause picture distortion. This is not a LED display issue.

Others

The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)

contents.

• Black bars on the top and bottom will appear during movies that have aspect ratios different from

your LED display.

• Adjust the picture size options on your external device or LED display to full screen.

The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the LED display from 5~6 feet away.

The cable/set top box remote control

doesn’t turn the LED display on or off, or

adjust the volume.

• Programme the Cable/Set top box remote control to operate the LED display. Refer to the Cable/Set

user manual for the SAMSUNG LED display code.

A “Mode Not Supported” message

appears.

• Check the supported resolution of the LED display, and adjust the external device’s output resolution

accordingly.

There is a plastic smell from the LED

display.

• This smell is normal and will dissipate over time.

The LED display Signal Information is

unavailable in the Self Diagnosis Test

menu.

• This function is only available with digital channels from an Antenna / RF / Coax connection.

LED display is tilted to the right or left side. • Remove the stand base from the LED display and reassemble it.

There are difﬁculties assembling the stand

base.

• Make sure the LED display is placed on a ﬂat surface. If you can not remove the screws from the LED

display, please use a magnetized screw driver.

The Channel menu is grey out

(unavailable).

• The Channel menu is only available when the LED display source is selected.

Your settings are lost after 30 minutes or

every time the LED display is turned off.

• If the LED display is in the Store Demo mode, it will reset audio and picture settings every 30

minutes. Change the settings from Store Demo mode to Home Use mode in the Setup (Initial setup)

procedure. Press the SOURCE button to select TV mode, and go to MENU → System → Setup

(Initial setup) → ENTER

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables

are ﬂexible enough for long term use. If mounting the LED display to the wall, we recommend using

cables with 90 degree connectors.

You see small particles when you look

closely at the edge of the frame of the LED

display.

• This is part of the product’s design and is not a defect.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung T24B350 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung T24B350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info