Adjusts the level of specific bandwidth frequencies.
■
Reset: Resets the Equalizer to its default settings.
DTS TruSurround
t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
Auto Volume
Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Speaker Select
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to
External Speaker.
✎When you set Speaker Select to External Speaker, the TV’s speakers are
turned off. You will hear sound through the external speakers only. When you
set Speaker Select to TV Speaker, both the TV’s speakers and the external
speakers are on. You will hear sound through both.
✎When Speaker Select is set to External Speaker, the volume and MUTE
buttons will not operate and the sound settings will be limited.
✎If there is no video signal, both speakers will be mute.
TV Installation Type
This is the feature that set sound filter to fit into the installation condition
of TV. Adjust TV Sound to suit either stand or Wall Mount Installation.
✎For India Only.
Sound Reset
■
Reset All: Reset all sound settings to the factory defaults.
Selecting the Sound Mode
t
When you set to Dual I-Dual II, the current sound mode is displayed on
the screen.
Audio TypeDual I-IIDefault
A2 Stereo
MonoMono
Automatic
change
Stereo
Stereo
↔
Mono
Dual
Dual I
↔
Dual II
Dual I
NICAM
Stereo
MonoMono
Automatic
change
Stereo
Mono
↔
Stereo
Dual
Mono
↔
Dual I
Dual II
Dual I
✎If the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
✎Only activated in stereo sound signal.
✎This function is available for all input sources.
Setup Menu
Language
Set the menu language.
✎Press ◄ or ► button to select menu language. (According to the different areas,
some countries have only one language.)
Time
✎
The current time will appear every time you press the INFO button.
■
Clock Set: Set the Year, Month, Day, Hour, Minute.
■
On Timer/Off Timer
✎Current time should be set first by Clock Set.
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun, Sun.
Select Off to turn of Repeat.
Hour/Minute: Enter the hour and minute for the TV to turn on or off.
Contents: Select TV.
Channel: Select the channel to be played when the TV turns on
automatically.
Volume: Select the volume level when TV turns on automatically.
■
Sleep Timer
t
Automatically shuts off the TV after a preset period of time. (Off, 30
min, 60 min, 90 min, 120 min, 150 min and 180 min)
✎To cancel Sleep Timer, select Off.
Melody
Set so that a melody plays when the TV is turned Off, Low, Medium
and High.
✎The Melody does not play.
- When no sound is output from the TV because the volume has been reduced to
minimum with the VOL – button.
- When the TV is turned off by Sleep Timer function.
Self Diagnosis
✎
For India Only.
■
Picture Test: Use to check for picture problems. If the problem
continues to occur, check the color pattern.
■
Sound Test:
Use the built-in melody sound to check for sound problems.
■
Reset: Reset all settings to the factory defaults.
Support Menu
❑
Using the Media Play
Enjoy photos, music and/or movie files saved on a USB
Mass Storage Class (MSC) device.
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to
the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play.
✎The maximum displayed number of partition is 4.
Using the Media Play Menu
1. Press the MENU button. Press the
▲
or
▼
button to select Support,
then press the ENTER
E
button.
2. Press the
▲
or
▼
button to select Media Play (USB), then press the
ENTER
E
button.
3. Press the
◄
or
►
button to select an icon (Videos, Music, Photos),
then press the ENTER
E
button.
✎It might not work properly with unlicenced multimedia files.
✎If you want to view detailed information of the file being played, press TOOLS
button in the file list, and then select Information.
✎Need-to-Know List before using Media Play (USB)
•
Supported file systems are FAT and NTFS.
•
Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
P
POWER
MEDIA.P
•
Media Play only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples
of MSC are Thumb drives and Flash Card Readers. Devices should
be connected directly to the TV’s USB port. (LED 4000, 4003, 5000,
5003 series : USB HDD is not supported.) Does not support smart
devices connected in MTP or PTP protocol.
•
Before connecting your device to the TV, please back up your files
to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
•
A USB device that requires high power may not be supported. (LED
4000, 4003, 5000, 5003 series : 0.5A)
(LED 4100, 5100 series and above: 1A)
•
Do not disconnect the USB device while it is loading.
•
The higher the resolution of the image, the longer it takes to display
on the screen.
•
The maximum supported JPEG resolution is 15360 x 8640 pixels.
•
If a file is corrupted or the TV does not support the file type, the “Not
Supported File Format” message appears.
•
If a USB extension cable is used, the USB device may not be
recognized or the files on the device may not be read.
•
The TV cannot play MP3 files with DRM that have been downloaded
from a for-pay site. Digital Rights Management (DRM) is a technology
that supports the creation, distribution, and management of
digital content in an integrated and comprehensive way, including
protecting the rights and interests of content providers, preventing
illegal copying of contents, and managing billings and settlements.
•
PTP device is not supported.
•
If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be recognized
or may malfunction.
•
The power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
•
If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check the
connection.
•
If a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
•
Photos only supports sequential jpeg format.
•
The scene search and thumbnail functions are not supported in the
Videos.
•
If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and
some folders may not be opened.
•
The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
•
The media may not be playing smoothly when using the device
higher than USB 2.0.
✎The maximum displayed number of partition is 4.
•
The file name only works in supported menu language. The other
language is not displayed properly.
■
Videos
1. Press the
◄
or
►
button to select Videos, then press the ENTER
E
button in the Media Play menu.
2. Press the
◄/►/▲/▼
buttons to select the desired video in the file list.
3. Press the ENTER
E
button or (Play) button.
- The selected file is displayed on the top with its playing time.
- If video time information is unknown, playing time and the progress bar are not
displayed.
- During video playback, you can search using the ◄ and ► button.
- You can use () (REW) and () (FF) buttons during playback.
✎In this mode, you can play movie clips contained in a game, but you cannot play
the game itself.
y
Supported Subtitle Formats
- External
NameFile extension
MPEG-4 timed text.ttxt
SAMI.smi
SubRip.srt
SubViewer.sub
Micro DVD.sub or .txt
SubStation Alpha.ssa
Advanced SubStation Alpha.ass
- Internal
NameContainerFormat
XsubAVIPicture Format
SubStation AlphaMKVText Format
Advanced SubStation AlphaMKVText Format
SubRipMKVText Format
MPEG-4 Timed textMP4Text Format
y
Supported Video Formats
File
Extension
ContainerVideo CodecResolution
Frame
rate(fps)
Bit rate(Mbps)Audio Codec
*.mp4MP4
DivX 3.11/4.12/5.x/6.01920x10806~3020Mbps
MP3 / ADPCM /
AAC
H.2641920x10806~3020Mbps
VC-11920x10806~3020Mbps
MJPEG640x4806~3010Mbps
*.avi
*.mkv
AVI
MKV
DivX 3.11/4.12/5.x/6.01920x10806~3020Mbps
MP3 / AC3 /
LPCM / ADPCM
/ DTS
MPEG 1/2/41920x10806~3020Mbps
H.2641920x10806~3020Mbps
MJPEG640x4806~3010Mbps
*.asf
*.wmv
ASF
DivX 3.11/4.12/5.x/6.01920x10806~3020Mbps
MP3 / AC3 /
LPCM /ADPCM /
WMA / WMA Pro
MPEG 1/2/41920x10806~3020Mbps
H.2641920x10806~3020Mbps
*.ts
*.trp
*.tp
TS
MPEG2-TS1920x10806~3020Mbps
AC3 / AAC /
MP3 / DD+
H. 2641920x10806~3020Mbps
*.dat
*.mpg
*.mpeg
*.vob
PS
MPEG11920x10806~3020Mbps
AC3 / MPEG /
LPCM / AAC
MPEG21920x10806~3020Mbps
H. 2641920x10806~3020Mbps
*.3gp3GPP
MPEG 1/2/41920x10806~3020Mbps
MP3
H.2641920x10806~3020Mbps
*.flvflash formats
H.2641920x10806~3020Mbps
MP3
Sorenson H.2631920x10806~3020Mbps
Other Restrictions
y
Video content will not play, or not play correctly, if there is an error in the
content or the container.
y
Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
y
If the Index Table is in error, the Seek (Jump) function is not supported.
y
The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
y
Video content can not be played, if there are many contents in one file.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
Music
1. Press the
◄
or
►
button to select Music, then press the ENTER
E
button in the Media Play menu.
2. Press the
◄/►/▲/▼
buttons to select the desired Music in the file list.
3. Press the ENTER
E
button or (Play) button.
✎During music playback, you can search using the ◄ and ► button.
✎
(REW) and (FF) buttons do not function during play.
✎Only displays the files with MP3 file extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
✎If the need to change Equalizer - when playing MP3, then exit Media Play, adjust
the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound
problem.)
■
Photos
1. Press the
◄
or
►
button to select Photos, then press the ENTER
E
button in the Media Play menu.
2. Press the
◄/►/▲/▼
buttons to select the desired photo in the file list.
3. Press the ENTER
E
button or (Play) button.
✎NOTE
xWhile a photo list is displayed, press the (Play) / ENTER
E
button on the remote
control to start the slide show.
xAll files in the file list section will be displayed in the slide show.
xDuring the slide show, files are displayed in order.
xDuring the slide show, you can adjust the slide show speed using () (REW) or (
) (FF) button.
xYou can move to other file using ◄ or ► button.
✎Press TOOLS button and select Background Music. Music files can be
automatically played during the Slide Show if the Background Music is set to On.
✎The Mode in Background Music cannot be changed until theBGM has finished
loading.
y
Supported Photo Formats
ImagePhotoResolution
JPEG
Base-line15360 x 8704
Progressive1024 x 768
Other Restrictions
CMYK, YCCK Colour space JPEG are not supported.
■
Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
✎NOTE
xThe
c
mark appears to the left of the selected files.
xTo cancel a selection, press the Yellow button again.
xTo deselect all selected files, press the TOOLS button and select Deselect All.
■
Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
■
Copying the files to the other USB device
For 4100 / 5100 models
1. Press the button in the file list to select the desired file.
2. When you press the
button, the selected files copy to the other
USB device.
✎Available only when both USB devices are connected to the TV.
✎The FAT32 file system cannot copy the file which size is more than 4GB.
✎Copy&Capture is only available for 4100/5100 models.
✎The maximum number of marked files for one folder is 999, if to be continued, 1
more files can be marked in another folder.
USBSupport File System
Play (Read)NTFS, FAT, FAT32
Copy & CaptureFAT, FAT32
DeleteNTFS,FAT,FAT32
FormatNTFS,FAT,FAT32
✎All file system format will be transformed to FAT32 system after formating.
■
Media Play - Additional Functions
Videos/Music/PhotosPlayOptionmenus
When playing a file, press the TOOLS button.
CategoryOperationVideosMusicPhotos
Title
You can move the other file directly.
c
Repeat Mode
You can play movie and music files repeatedly.
cc
Picture Size
You can adjust the picture size to your preference.
c
Picture Mode
You can adjust the picture setting.
cc
Sound Mode
You can adjust the sound setting.
cc
Subtitle
Settings
You can play the video with Subtitles. This
function only works if the subtitles are the same
file name as the video.
c
Audio language
You can change the audio language if the video
has more than one language.
c
Stop Slide
Show / Start
Slide Show
You can start or stop a Slide Show.
c
Slide Show
Speed
You can select the slide show speed during the
slide show.
c
CategoryOperationVideosMusicPhotos
Background
Music
You can set and select background music
when watching a Slide Show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the played file.
ccc
❑
Using the Soccer Mode
Soccer Mode
t
This mode provides optimised condition for watching sports games.
Zoom: Pause playback and dived the picture into 9 parts. Select a part
to zoom it in. Press this button again to resume.
✎When Soccer Mode is On, the picture and sound modes are set to Stadium
automatically.
✎If you turn the TV off while watching Soccer Mode, the Soccer Mode will be
disable.
✎Mode name may vary depending on nations. Cricket Mode, Soccer Mode,
Sports Mode.
❑
Using the Screen&Sound Capture mode
Screen&Sound Capture mode
This mode provides a way to capture the images and audio.
✎Only available for UH4100/5100/5140/5141/5142/5050/5150.
Press
and the Screen&Sound Capture mode will be turned on, or
press MENU button, enter Support Menu select Screen&Sound Capture.
Press
again the Screen&Sound Capture mode will be turned off.
✎Before enabling the Screen&Sound Capture mode, the USB device should be
connected first.
✎Media Play mode not available.
Screen Capture
After turning on the Screen&Sound Capture mode, press to make a
current screen capture.
Items are stored in Photos folder in Media Play.
✎At least after 15 seconds the next capture can be operated again.
Sound Recording
After turning on the Screen&Sound Capture mode, press to make a
recording of the current sound, press
again to stop the recording.
Items are stored in Music folder in Media Play.
✎If you press any key, Audio Recording will be stopped.
View Content
Press to get into Media Play.
Press
◄
or
►
button to select Music for items of recording or Photos for
items of capturing.
✎Screen&Sound Capture are for personal use only, not for commercial purpose
and/or communication to the public.
✎The user may not use these features for commercial purposes without prior
approval from the copyright owners and/or to use it unlawfully.
✎Samsung does not accept responsibility for any misuse of the service.
❑
Default Recording Device
You can set the default device for saving captured image files and recorded
audio files.
✎This function is only available when the USB device is connected the TV, and
Screen&Sound Capture mode is on.
❑
Software Upgrade
Software Upgrade can be performed by downloading the latest firmware
from “www.samsung.com” to a USB memory device.
❑
DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to
the DivX web site and register with 10-digit registration code, you can
download the VOD activation file. Once you play it using Media Play, the
registration is completed.
✎For more information on DivX® VOD, visit http://vod.divx.com.
❑
HD Connection Guide
You can read a guide to connect external devices for HD sources.
❑
Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
Other Information
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product
or injury to yourself or others if you select to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest dealer.
If you install the TV on a ceiling or slanted wall, it may fall and result in
severe personal injury.
✎NOTE
•
Standard dimensions for wall mount kits are shown in the table
below.
•
When purchasing our wall mount kit, a detailed installation manual
and all parts necessary for assembly are provided.
•
Do not use screws that do not comply with the VESA standard
screw specifications.
•
Do not use screws longer than the standard dimension, as they
may cause damage to the inside of the TV set.
•
For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on
the wall mount specifications.
•
Do not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
•
Samsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
•
Do not mount the TV at more than a 15 degree tilt.
•
Always have two people mount the TV on a wall.
Product
Family
Models
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
LED-TV
UA20H4003 UA22H5003
UA23H4003 UA24H4003
UA24H4053 UA24H4100
UA24H4150
75 X 75
M4
4
UA28H4000 UA28H4100100 X 100
UA32H4000 UA32H4100
UA32H5050 UA32H5100
UA32H5150 UA40H5000
UA40H5050 UA40H5100
UA40H5140 UA40H5141
UA40H5142 UA40H5150
200 X 200
M8
UA48H5050 UA48H5100
UA48H5140 UA48H5141
UA48H5142 UA48H5150
400 X 400
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
Securing the TV to the Wall
Caution
: Pulling, pushing, or climbing onto the TV may cause
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
✎Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎You may need additional material such as an anchor depending on the type of
wall.
✎Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎Note
xInstall the TV near to the wall so that it does not fall backwards.
xIt is safe to connect the string so that the clamps fixed on the wall are equal to
or lower than the clamps fixed on the TV.
xUntie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎Please find a “
K
” icon on the rear of the TV. The Kensington slot is beside the
“
K
” icon.
✎The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
✎The locking device has to be purchased separately.
✎The location of the Kensington slot may be different depending on the TV model.
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click
on Support, or contact the call centre listed on the back-cover of this manual.
ProblemPossible Solution
Picture Quality
The TV image does not look as good as it
did in the store.
y
If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
y
Antenna connection: Try HD stations after performing Auto tuning.
✎Many HD channels are up scaled from SD(Standard Definition) contents.
y
Adjust the Cable/Set top box video output resolution to 1080i or 720p.
y
Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
y
Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
y
Low signal level or bad quality can cause picture distortion. This is not a TV issue.
y
Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
y
If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
y
Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
y
Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
y
If the picture size is set to Screen Fit, change it to 16:9.
y
Change cable/satellite box resolution.
The picture is black and white.
y
If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
y
If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
y
Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
There is no sound or the sound is too low at
maximum volume.
y
Please check the volume of external device connected to your TV.
The picture is good but there is no sound.
y
Set the Speaker Select option to TV Speaker in the sound menu.
y
If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
y
If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
y
If you are using a HDMI cable, a separate audio cable is required.
y
If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
y
Check the cable connections. Make sure a video cable is not connected to an audio input.
y
For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
y
Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
y
Make sure the wall outlet is working.
y
Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.
y
Ensure the Sleep Timer is set to Off in the Time menu.
y
If your PC is connected to the TV, check your PC power settings.
y
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
y
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
y
Check cable connections (remove and reconnect all cables connected to the TV and external devices).
y
Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
y
Make sure your connected devices are powered on.
y
Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
ProblemPossible Solution
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
y
Make sure the Antenna cable is connected securely.
y
Please try Setup (Plug & Play) to add available channels to the channel list. Go to MENU - System - Setup (Plug & Play) and
wait for all available channels to be stored.
y
Verify the Antenna is positioned correctly.
The picture is distorted: macroblock error,
small block, dots, pixelization
y
Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
y
A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported” message
appears.
y
Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
y
If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture will not display in full screen.
y
HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
y
Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
y
Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
y
Replace the remote control batteries with the poles (+/–) in the right direction.
y
Clean the transmission window located on the top of the remote control.
y
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control does
not turn the TV on or off, or adjust the
volume.
y
Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “Mode Not Supported” message
appears.
y
Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
There is a plastic smell from the TV.
y
This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
y
Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand
base.
y
Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The Broadcasting menu is grey out
(unavailable).
y
The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or
every time the TV is turned off.
y
If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings
from Store Demo mode to Home Use.
You have intermittent loss of audio or video.
y
Check the cable connections and reconnect them.
y
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
y
This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
y
Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
y
To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
✎You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
Storage and Maintenance
✎
If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Licence
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source Licence Notice is written only English.
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Model Name
UA20H4003UA22H5003UA23H4003
UA24H4003
UA24H4100
UA24H4053
UA24H4150
Display Resolution1600 X 9001920 X 10801366 X 768
Screen Size49 cm54 cm58 cm60 cm60 cm
Sound
Output
5W X 23W X 23W X 25W X 25W X 2
Dimensions (W x H x D)
Body
With stand(Round)*
With stand(Square)*
With stand(T-Stand)*
46.8 X 29.1 X 4.6 cm
-
46.8 X 32.6 X 16.3 cm
-
50.6 X 31.7 X 4.6 cm
-
50.6 X 35.5 X 15.1 cm
-
55.1 X 33.1 X 4.9 cm
55.1 X 36.8 X 12.3 cm
-
-
56.1 X 34.9 X 4.7 cm
-
56.1 X 38.4 X 16.3 cm
-
56.1 X 34.9 X 6.5 cm
-
-
56.1 X 39.1 X 14.0 cm
Weight
Without Stand
With stand(Round)*
With stand(Square)*
With stand(T-Stand)*
2.6 kg
-
2.8 kg
-
3.1 kg
-
3.2 kg
-
2.9 kg
3.0 kg
-
-
3.9 kg
-
4.1 kg
-
3.9 kg
-
-
4.05 kg
Model Name
UA28H4000
UA28H4100
UA32H4000
UA32H4100
UA32H5100
UA32H5050
UA32H5150
UA40H5000
UA40H5100
Display Resolution1366 X 7681920 X 1080
Screen Size70 cm81 cm81 cm81 cm102 cm
Sound
Output
5W X 210W X 210W X 2
Dimensions (W x H x D)
Body
With stand(Round)*
With stand(Square)*
With stand(T-Stand)*
64.3 X 39.6 X 6.2 cm
64.3 X 43.5 X 20.3 cm
64.3 X 43.5 X 16.3 cm
-
73.6 X 44.7 X 6.2 cm
73.6 X 48.5 X 20.3 cm
73.6 X 48.5 X 16.3 cm
-
72.3 X 42.7 X 6.4 cm
72.3 X 46.5 X 20.3 cm
72.3 X 46.5 X 16.3 cm
-
72.3 X 42.7 X 6.4 cm
-
-
72.3 X 46.8 X 15.1 cm
90.8 X 53.2 X 6.4 cm
-
90.8 X 57.8 X 19.6 cm
-
Weight
Without Stand
With Stand(Round)*
With stand(Square)*
With stand(T-Stand)*
3.7 kg
4.0 kg
4.1 kg
-
4.8 kg
5.3 kg
5.3 kg
-
4.9 kg
5.3 kg
5.3 kg
-
4.9 kg
-
-
5.2 kg
7.6 kg
-
8.3 kg
-
Model Name
UA40H5140
UA40H5141
UA40H5142
UA40H5050
UA40H5150
UA48H5100
UA48H5140
UA48H5141
UA48H5142
UA48H5050
UA48H5150
Display Resolution1920 X 1080
Screen Size102 cm102 cm121 cm121 cm121 cm
Sound
Output
10W X 2
Dimensions (W x H x D)
Body
With stand(Round)*
With stand(Square)*
With stand(T-Stand)*
90.8 X 52.9 X 7.1 cm
-
90.8 X 57.8 X 19.6 cm
-
90.8 X 53.2 X 6.4 cm
-
-
90.8 X 57.7 X 16.9 cm
107.6 X 62.6 X 6.5 cm
-
107.6 X 67.4 X 20.3 cm
-
107.6 X 62.3 X 7.1 cm
-
107.6 X 67.4 X 20.3 cm
-
107.6 X 62.6 X 6.5 cm
-
-
107.6 X 67.2 X 17.6 cm
Weight
Without Stand
With Stand(Round)*
With stand(Square)*
With stand(T-Stand)*
7.6 kg
-
8.3 kg
-
7.6 kg
-
-
8.0 kg
10.9 kg
-
11.8 kg
-
10.9 kg
-
11.8 kg
-
10.9 kg
-
-
11.6 kg
✎Design and specifications are subject to change without prior notice.
✎For information about the power required and more about power consumption, refer to the label attached to the product.
✎The option may differ depending on country.
✎UH5100 models/series include UH5140/5141/5142/5050/5150.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xIf you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎The appearance may differ depending on the product.
✎Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Recommendation - Jordan Only
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
- 10 -- 9 -
- 14-- 13 -
- 11 -
- 15 -
- 12 -
- 16 -
[UH4000-SEA]BN68-05733E-16ENG.indb 22014-08-26 오후 12:59:40
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Samsung UA40H5100 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
