Bedienungsanleitung Samsung UBD-M9500 (Seite 28 von 67) (Englisch)

735778

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

28 English

Settings

7. On the Security screen, enter your network's

Security Code or Pass Phrase.

Enter letters by selecting a letter with an arrow

button, and then pressing (OK) button.

| NOTE |

To view the password as you enter it, use the

arrow buttons to select Show Password on

the right side, and then press (OK) button.

8. When finished, select Done and then press

the (OK) button. The product verifies the

network connection and then connects to the

network.

9. When verification is complete, select OK, and

then press the (OK) button.

| NOTE |

You should be able to find the Security Code or

Pass Phrase on one of the set up screens you

used to set up your router or modem.

Wireless - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

1. Follow the directions in Wireless - Automatic

through Step 6.

2. The product searches for a network, and then

displays the connection failed message.

3. On the bottom of the screen, select IP

Settings, and then press the (OK) button.

The IP Settings screen appears.

4. Select the IP Settings field, and then press

the (OK) button.

5. Select Enter manually in the IP Settings

field, and then press the (OK) button.

6. Select a parameter to enter (IP Address, for

example), and then press the (OK) button.

Use the Left/Right buttons on the remote

control to enter the numbers for the

parameter.

Use the Left/Right/ (OK) buttons on the

remote control to move from entry field to

entry field within a parameter. When done with

one parameter, select the Done.

7. Press the Up or Down button to move

to another parameter, and then enter the

numbers for that parameter following the

instructions in Step 6.

8. Repeat Steps 6 and 7 until you have filled in

all parameters.

| NOTE |

You can get the Network parameters from your

Internet provider.

9. When finished, select OK, and then press the

(OK) button. The Security Screen appears.

10. On the Security screen, enter your network's

Security Code or Pass Phrase. Enter letters

by selecting a letter with the Up/Down/Left/

Right buttons, and then press the (OK)

button.

11. When finished, select Done at the right of the

screen, and then press the (OK) button.

The product verifies the network connection

and then connects to the network.

12. After the product verifies the network, select

OK, and then press the (OK) button.

WPS(PBC)

1. In the Home screen, select Settings, and

then press the (OK) button.

2. Select General, and then press the (OK)

button.

3. Select Network, and then press the (OK)

button.

4. Select Network Settings, and then press the

(OK) button.

5. Select Wireless in the Network Type screen,

and then press the (OK) button. The

product searches for and then displays a list

of the available networks.

6. Press the Down button on your remote, and

then press the (OK) button to select Use

WPS. The "Press the WPS or PBC button

on your wireless router within the next two

minutes." message appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung UBD-M9500 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung UBD-M9500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info