633530
89
Zoom out
Zoom in
Vorherige Seite
1/117
Nächste Seite
84
The Schedule Recording/Timeshift Function Isn't Working
When Timeshift or Schedule Recording aren't working, these steps may help resolve the problem.
The problem Try this!
Schedule Recording cannot be
used.
Check if there is a USB device connected to the TV.
Recording will automatically stop if the signal becomes too weak. The
Timeshift function will not work if there isn't enough storage space on the
USB device.
Anynet+ (HDMI-CEC) Isn't Working
When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem Try this!
Anynet+ does not work.
Confirm that the device is an Anynet+ device. The Anynet+ system supports
Anynet+ devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC) ( Settings System Expert Settings
Anynet+ (HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including
Channel Search, Smart Hub, Plug & Play, etc.
If you have disconnected and then reconnected the HDMI cable, scan for
devices again or turn your TV off and on.
I want to start Anynet+.
Check if the Anynet+ device is properly connected to the TV, and then select
the Anynet+ (HDMI-CEC) ( Settings System Expert Settings
Anynet+ (HDMI-CEC)) menu to see if Anynet+ (HDMI-CEC) is set to On.
I want to exit Anynet+.
Set Anynet+ (HDMI-CEC) ( Settings System Expert Settings
Anynet+ (HDMI-CEC)) to Off.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from Anynet+
device" appears on the screen.
You cannot use the remote control when the TV is configuring Anynet+
or switching to a viewing mode. Use the remote control after the TV has
completed the Anynet+ configuration or has switched to a viewing mode.
The Anynet+ device won't
play.
You cannot use the play function when Start Setup is in progress.
The connected device is not
displayed.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC) ( Settings System Expert Settings
Anynet+ (HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure
the device is connected to your TV with an HDMI cable. Some HDMI cables may
not support Anynet+.
If the connection is terminated because there has been a power failure or the
HDMI cable has been disconnected, please scan for the device again.
89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

samsung-ue49ku6409

Suche zurücksetzen

  • kein signal ,obwohl antenne angeschlossen. sattelitenanlage Eingereicht am 11-2-2017 13:25

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung UE49KU6409 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Samsung UE49KU6409

Samsung UE49KU6409 Bedienungsanleitung - Deutsch - 117 seiten

Samsung UE49KU6409 Bedienungsanleitung - Holländisch - 117 seiten

Samsung UE49KU6409 Bedienungsanleitung - Französisch - 117 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info