Bedienungsanleitung Samsung VR9200 POWERbot - VR20J9259 (Seite 130 von 144) (Deutsch, Englisch, Holländisch, Französisch)

657025

130

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH-22

Samsung Smart Home App

Preparing the network

Setting up the wireless router

fThis product supports only DHCP(Dynamic Host Configuration Protocol). Please check if the DHCP server

option function of a wireless router is activated.

fThe supported types of authorization/encryption of the wireless router are WEP-OPEN, WPA-PSK/TKIP and

WPA2-PSK/AES 801.11n.

– WPA2-PSK/AES is recommended to be used.

fThe quality of connection of the wireless network may be influenced by the surrounding wireless environment.

fWhen your Internet service provider has permanently registered an MAC address (a unique identification

number) of your PC or modem, your POWERbot may be unavailable to be connected to the Internet. Ask your

Internet service provider about the procedure to connect an apparatus other than a PC to the Internet.

fIf your internet service provider requires your ID or password to connect to the internet, your POWERbot may

not be able to connect to the internet. In this case, you must enter your ID or password when connecting to

the internet.

fThe connection to the Internet may be impossible because of issues of firewall. Ask your Internet service

provider for resolving the issue.

fSome wireless routers may convey an abnormal Domain Name Server (DNS) address even if the Internet is not

connected. In this case, inquire the provider of the pertinent wireless router and your Internet service provider.

fIf you still cannot connect to the Internet even after trying the procedure informed by your Internet service

provider, please ask an agency or service center of Samsung Electronics.

Note

f Please refer to the user manual of the pertinent wireless router without access problems.

f Samsung POWERbots support only Wi-Fi 2.4 Ghz.

f Samsung POWERbots support the communication protocol of the methods of IEEE 802.11b/g/n

and Wi-Fi Direct. (Samsung Electronics recommends to use IEEE 802.11n.)

f A wireless router with no authorization of Wi-Fi may be unavailable to be connected to the

POWERbot.

f When the power is supplied and the POWERbot is docked on the charger, the POWERbot will be

connected to the server and then check if there is software updates. If there is the latest software, it

will be automatically downloaded and updated.

f If “UPAM” is displayed on the display panel while the POWERbot is charging, it means that the

update is in progress. Please wait for completing the rebooting.

f If the product registration is not done, please follow the following instructions:

– Refer to the popup message and retry the registraion procedure.

– Check if the UPnP option of the wireless router is available and retry the registration procedure.

– Check if the operating mode of the wireless router is a router mode and retry the registration procedure.

– If you have more than two POWERbot, turn off the others to register the one. The connection must be one

to one.

f Samsung Smart Home Service does not guarantee a normal operation under firewall environment.

4_SR9200J_EN_DJ68-00732D-00.indd 22 2015-08-26 오전 11:57:22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung VR9200 POWERbot - VR20J9259 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info