Bedienungsanleitung Samsung VR9200 POWERbot - VR20J9259 (Seite 136 von 144) (Deutsch, Englisch, Holländisch, Französisch)

657025

136

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH-28

Notes and cautions

Charging

Note

f If the battery overheats during charging, it

may take longer to charge.

f When automatic charging is not working,

please check the followings.

– Turn the emergency switch (on the bottom of

POWERbot) off and on again.

– Unplug the charger's power plug and then plug

it back on.

– Check whether there is any foreign matter in

the charge pins and clean POWERbot and the

charge pins of the charger with a dry cloth or

rag.

– Check for any obstacles such as reflective

objects, chairs, etc. near the charger.

f If POWERbot is left detached from the

charger, the battery will drain naturally.

– Try to keep POWERbot being charged on the

charger. (Turn off the emergency switch and

leave the charger unplugged when planning

to leave the house for long periods of time by

going on a business trip or vacation, etc., )

In use

Note

f The POWERbot may get caught on

thresholds, etc. during cleaning.

– To restart operation, shut off the emergency

switch, move POWERbot to an area where it

can move easily and then turn on the power

again.

f The POWERbot cannot completely clean

areas it cannot enter, such as corners,

between the wall and sofa, etc.

– Please use another cleaning tool to clean them

regularly.

f The POWERbot cannot vacuum clumps of

dirt, so some may remain on the floor after

cleaning.

– Please use another cleaning tool to clean them

regularly.

f If the battery becomes low during Auto clean

mode, POWERbot will recharge and finish

cleaning the remaining area after recharging.

(Repeat cleaning frequency: 1 time)

f You cannot select and execute Manual clean

mode while charging.

– If you press Manual clean / Point cleaning

button while charging, the POWERbot will be

detached from the charger and then turn into

the standby mode.

f Do not unnecessarily move POWERbot or

press buttons while it is in Auto clean mode. It

assumes that cleaning is complete and starts

cleaning again from the beginning.

Cleaning and maintenance

Note

f If you washed the dustbin and filter with water

– Dustbin: Completely wipe out the water.

– Filter: Completely dry it in a shade before use.

Caution

f Watch your finger when attaching or

detaching the filter, since they may get stuck

in the dustbin's intake.

f To avoid blockages by foreign matter, do not

let toothpicks, cotton swabs etc. from being

vacuumed by POWERbot.

f If it is difficult to remove foreign matters from

the Power brush, contact a service center.

f Since the power brush removes dirt from the

floor during cleaning, foreign matters such as

thread, long hair, etc. may get caught in it.

Therefore check and clean it regularly.

4_SR9200J_EN_DJ68-00732D-00.indd 28 2015-08-26 오전 11:57:24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung VR9200 POWERbot - VR20J9259 Seite 136

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info