796244
48
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
English
Operations
English48
Special features
Smart control (applicable models only)
You can connect to the SmartThings app and control your washing machine remotely.
Connecting your washing machine
1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2. Tap to turn on the washing machine.
3. Tap and hold .
a. The washing machine enters AP mode and connects to your smartphone or tablet.
b. Tap to authenticate your washing machine.
c. Once the authentication process is complete, your washing machine is successfully connected to the
app.
-You can use various features available in the SmartThings app.
NOTE
If your washing machine fails to connect with the SmartThings app, try again.
Check your router if you experience any Internet connection problem after connecting your washing
machine with the SmartThings app.
If the Wi-Fi is off, tap and hold for 3 seconds to enter the Settings menu, and select Wi-Fi to turn it on.
Turning the washing machine's Wi-Fi on allows you connect to the washing machine via SmartThings
app on your smartphone or tablet, regardless of the power status of the washing machine. However, the
washing machine appears offline on the SmartThings app if the washing machine's Wi-Fi is off.
Close the door before starting the Smart Control function.
If you use your washing machine for a while without connecting it to the SmartThings app, a pop-up
message about Smart Control will show for 3 seconds.
If the washing machine's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you
turn of the power.
Stay Connect
Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a
cycle. Your washing machine stays connected to the app so you can send additional instructions, whether
you are at home or away.
1. If you turn on the Stay Connect function on the SmartThings app, the washing machine will stay in
standby power saving mode after completing a cycle.
-The Stay Connect function will remain active for up to 7 days if the door remains closed.
2. When the Stay Connect function is active, the Smart Control, Door Lock, and Wi-Fi icons are illuminated
on your washing machine display.
3. You can conveniently control your washing machine, adding rinse, spin or dry cycles using the
SmartThings app.
NOTE
The washing machine switches to standby power saving mode when operation is paused even if the
machine is not connected to the SmartThings app.
Untitled-1 48 2022-10-05  11:44:04
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung WW11BB504 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Samsung WW11BB504

Samsung WW11BB504 Bedienungsanleitung - Deutsch - 76 seiten

Samsung WW11BB504 Bedienungsanleitung - Holländisch - 76 seiten

Samsung WW11BB504 Bedienungsanleitung - Französisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info