Bedienungsanleitung Sangean DDR-63plus (Seite 18 von 104) (Englisch)

487766

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

In most installations the DNS settings (DNS = Domain Name Server) will be set to the same IP

address as your router. In this case the secondary DNS may be left at zero. To enter the DNS address,

press the Folder Up or Down buttons on the remote control to set the value for each group of digits

and then press the Select button or the Left or Right buttons (on the remote

control) to enter the value

and to move on to the next group. Repeat this until all eight groups of digits have been entered. If

you previously specied ‘Wired’ and then ‘DHCP disable’, your radio should now connect to the router

using the Ethernet cable (in which case skip to step 11).

If you specied ‘Wireless’, the next step is to set up the WiFi connection, starting with the name of

the wireless network (SSID) followed by the encryption options and password. To enterthe SSID,

characters are selected and entered using the Folder Up or Down, Left or Right on the remote control

and Select buttons. The radio scrolls through the available characters as well as the three controls

on the right. The character currently highlighted will be entered when you press theSelect button.

Do this as needed until the complete network name has been entered. The SSID setting is sensitive

to upper and lower case characters and symbols. You must enter it exactly as set up in your router.

The three controls on the right-hand side of the screen have special functions.

You can quickly access these by pressing the Info button and then use the Folder Up or Down and

Select buttons on the remote control as needed:

select ‘ ’ to erase a character just entered (long press to clear); Info again to continue

select ‘ ’ when the complete SSID has been entered

select ‘ ’ to cancel and go back to the DNS settings screen

Having entered the SSID, you must enter details of the encryption system used on your wireless

network. This should be the same as specied in your router settings. If your network does not use

encryption, then select the ‘Open’ option. Your radio should then connect to the network, so skip to

step 11. If your network uses WEP (Wired Equivalent Privacy) select the ‘Pre-Shared Key’ option

then go to step 8. The remaining options are for WPA or WPA2 (WiFi Protected Access) – see step 9.

If you chose ‘Pre-Shared Key’ in step 7, you should then choose the WEP option. The key should

be entered using only the numbers 0-9 and the letters A-F. The key will be 10 characters long for

64-bit encryption and 26 characters long for 128-bit encryption. The radio willaccept lower-case

letters a-f as equivalent to upper-case A-F. Spaces or special symbols are not permitted in WEP keys.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean DDR-63plus Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean DDR-63plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info