Bedienungsanleitung Sangean FMT-02 - Bluetooth In-Car Adapter (Seite 13 von 20) (Englisch)

797362

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

3. Rotate the Tuning control knob to select “On” or “Off”. To activate the traffic announcement

function,select“On”.PresstheTuningcontrolknobtoconrmthesetting.Todisablethisfunction,

select“Off”.PresstheTuningcontrolknobtoconrmthesetting.

DAB service following function

If the reception quality of the programme being received decreases, the Gotune can automatically

tune to the programme in another ensemble (if available). For this feature to work, the service

following function must be activated.

Press the SF button to switch service following on / off. The “S/F” symbol on the display shows that

the service following function is activated.

Alternative you can set it in the DAB menu.

1. When in DAB mode press and hold the Info / Menu button to enter the DAB menu list.

2. RotatetheTuningcontrolknobtond“ServiceFollowing”.PresstheTuningcontrolknobtoenter

the setting.

3. Rotate the Tuning control knob to select “On” or “Off”. To activate service following, select “On”.

Press the Tuning control knob to confirm the setting. The “S/F” will appear on the display. To

disablethisfunction,select“Off”.PresstheTuningcontrolknobtoconrmthesetting.The“S/F”

will disappear on the display.

Presets in DAB and FM Tx modes

There are 10 memory presets each for DAB radio and FM transmitter. They are used in the same

way for each operating mode.

1. Press the Power On / Off button to switch on your GoTune.

2. Tune to the required radio station / frequency as previously described.

3. Press and hold the Preset button to enter the “Preset Store” menu. Rotate the Tuning Control

knob to scroll through the preset list until you reach an unused preset or a preset that you wish

to change. Press and release the Tuning Control knob to store the preset. “Preset 1 Stored” (for

example) will be shown on the display. The corresponding preset number e.g.“P1” will show on

the display. Repeat this procedure for the remaining presets.

4. Stations which are already stored in the presets may be over written by following the above procedure.

Recall a preset in DAB and FM Tx modes

1. Press the Power On / Off button to switch on your GoTune.

2. Press the Mode button to select the required operating mode.

3. Press and release the Preset button to display the ‘Preset Recall’ menu. Rotate the Tuning Control

knob to select the desired preset station / frequency. Press and release the Tuning Control knob.

Your GoTune will then tune to the station / frequency stored in the selected preset memory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean FMT-02 - Bluetooth In-Car Adapter Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean FMT-02 - Bluetooth In-Car Adapter

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info