Bedienungsanleitung Sangean HDR-16 (Seite 5 von 15) (Englisch)

797367

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Auto clock set mode

1. Press the Power button to switch on your radio.

2. Press the Band button to select FM radio mode.

3. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “RBDS

Auto CT” is shown on the display. Press the Tuning control knob to enter the setting.

4. Rotate the Tuning control knob to select “Auto” and press the Tuning control knob to conrm the setting. Your

radio will synchronize its clock time whenever it tunes to a radio station using RDS / RBDS with CT signals. The

symbol “CT” will appear on the display indicating the radio time is RDS / RBDS clock time.

5. If you wish to cancel the “RBDS Auto CT” function, press and hold the Menu button and then rotate the Tuning

control knob until “RBDS Auto CT” is shown on the display. Press the Tuning control knob and rotate the Tuning

control knob to select “Manual”. Press the Tuning control knob to conrm the setting. Please refer to the later

section “Setting the clock manually” to set the clock time and date.

1. If the clock time was not auto adjusted within 24 hours, the symbol “CT” will disappear on the display.

2. If clock time from local RDS / RBDS station is not correct, you should consider disabling the “RBDS Auto CT”

function.

3. Please note that at times the RDS / RBDS signal may broadcast the wrong time, this is the fault of the radio

station and not your radio.

NOTE

Setting the clock manually

When choosing manual setting as the clock time setting of your radio, the “RBDS Auto CT” function will be disabled.

1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “Clock” is

shown on the display.

2. Press the Tuning control knob to enter the time setting. The hour digit will ash on the display.

3. Rotate the Tuning control knob to set the desired hour. Then press the Tuning control knob to conrm the setting.

The minute digit will ash on the display.

4. Rotate the Tuning control knob to set the desired minute and press the Tuning control knob to conrm the setting.

Now the month digit will ash on the display.

5. Follow the steps above to set the month / day / year. When the time and date setting is completed, the display will

show “Clock Saved”.

Setting the time format

1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “12 / 24

hour” is shown on the display.

2. Press the Tuning control knob and rotate the Tuning control knob to select 12 or 24 hour format. Press the Tuning

control knob to conrm the setting. The selected format is used in standby mode, in playing mode and when

setting the alarms.

Operating the radio

This radio is equipped with three tuning methods – Scan tuning, Manual tuning, Memory presets recall.

Scan tuning FM / AM

1. Make sure the telescopic antenna is set up in advance.

2. Press the Power button to switch on your radio.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean HDR-16 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info