Bedienungsanleitung Sangean HDR-18 (Seite 17 von 21) (Englisch)

797010

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

5. Rotate the Tuning control knob to choose the desired source for the

alarm (FM, AM or BUZZER). Press the Tuning control knob to conrm

the setting. If setting alarm to Buzzer proceed to step 7.

6. When selecting the alarm for FM or AM, rotate the Tuning control

knob to choose your required wake-up station or press the desired

Preset button (1-10). Then press the Tuning control knob to conrm

your selection.

7. Rotate the Tuning control knob to choose your desired volume and

press the Tuning control knob to conrm the setting. Your radio will

show ‘Alarm 1 Saved’ for instance and exit the alarm setting screen.

The ‘Alarm 1’ indicator will show on the display.

8. To view or quick change the On/Off status of the alarm, press and

release the Alarm 1 (or Alarm2) button.

When the alarm sounds

To cancel a sounding alarm, press the Standby button to cancel a

sounding alarm.

When the buzzer alarm activates, the alarm will start softly and

gradually increase in level. It will sound for 1 minute and silence for 1

minute in repetition for 60 minutes unless cancelled.

When the radio alarm is activated, the alarm will go off in Humane

Waking System. It will increase its volume from 0 to your set volume.

The ‘Alarm 1’ indicator or ‘Alarm 2’ indicator will highlight on the

display.

Disabling/canceling alarm setting

To cancel the alarm setting before the alarm sounds, rstly, press the

corresponding alarm button (i.e. alarm 1 or alarm 2 button) to enter the

alarm setting screen and then press the same button again to highlight

‘Off’. The alarm indicator will disappear from the screen and the chosen

alarm will now be disabled.

Snooze

The buzzer or radio alarm can be silenced for 5 minutes by pressing

any button other than the Standby button. In order to cancel the Snooze

timer while the alarm is suspended, press the Standby button.

Sleep timer

Your radio can be set to turn off after a preset time has elapsed. The

sleep timer setting can be adjusted between 15 and 180 minutes.

1. Press and hold the Sleep timer button to enter the sleep setup. ‘Set

sleep time’ will appear on the display.

2. Rotate the Tuning control knob to select the desired sleep time . The

options are 60, 90, 120, 150, 180, off, 15, 30. Press the Tuning

control knob to conrm the setting. Use the Off option to cancel the

sleep function. Your radio will switch into standby mode after the

preset time has elapsed. An active sleep timer is shown using a sleep

timer indicator ( ) on the playing display. To view the remaining

time of an active sleep timer setting, press the sleep timer button.

3. To cancel the sleep time before the preset time has elapsed and

to turn off the radio, press the Standby button to turn the unit off

manually. To cancel the sleep timer and leave the radio playing, go

back to the sleep timer settings (step 1 to 2) and select the Off option

in step 2.

4. You can view or change the On/Off status of the Sleep timer by

pressing the Sleep timer button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean HDR-18 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info