Bedienungsanleitung Sangean RCR-30 (Seite 10 von 12) (Englisch)

797018

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

4. To cancel the Sleep Timer function before the preset

time has elapsed, simply press and release the Standby

(main power) button to turn the unit off manually.

Display & Audio setup

Dimmer control

The brightness of the display may be adjusted. If you use

the unit in the bedroom, you may prefer a lower brightness

level than the standard setting.

1. Press and release the Snooze / Dimmer button repeatedly

to adjust the brightness level of the LCD display. The

backlight level will change with 8 different illumination

levels, you’ll be able to see the effect of the change.

2. Stop when the desired backlight level is reached.

Tone control

You can adjust the bass and treble of the sound of your

RCR-30 to enhance the tone while listening.

1. First ensure your radio is switched on. Press and

release the Volume control button to enter the tone

control setting.

2. The bass value will appear on the display. Rotate the

Volume control knob to adjust between +5~-5, and

press and release the Volume control button to confirm

the setting.

3. Then the treble value will appear on the display. Rotate

the Volume control knob to adjust between +5~-5, and

press and release the Volume control button to confirm

the setting.

4. You can also press the Bass up / down button and

Treble up / down button on the Remote control to

adjust the bass and treble of the sound.

Loudness

You can get compensation on lower and higher frequency

for your RCR-30 by adjusting the Loudness function.

1. Press and hold the Info / Menu button to enter the

menu setting.

2. Rotate the Tuning control knob until LOUD ON / OFF

appears on the display. Press and release the Tuning

control button to enter the setting.

3. Rotate the Tuning control knob to choose ON to turn

on the Loudness function, then press and release the

Tuning control button to confirm the setting.

4. To turn off the Loudness function, select OFF and

press and release the Tuning control button to confirm

the setting.

Mute function

Press the Mute button on the remote control of your radio,

it will mute the output from the loudspeakers.

1. Press the Mute button to mute the sound output.

2. Press the Mute button again or one of the Volume

buttons to un-mute the sound output.

Auxiliary input socket

A 3.5mm stereo Auxiliary Input socket is provided on the

rear of your radio to permit an audio signal to be fed into

the unit from an external audio device such as iPod, MP3

or CD player.

1. Press the Standby (main power) button to switch on

your radio.

2. Repeatedly press and release the Source button until

AUX IN is displayed.

3. Connect an external audio source (for example, iPod,

MP3 or CD player) to the Auxiliary Input socket.

4. Adjust the volume setting on your iPod, MP3 or CD

player to ensure an adequate signal level from the

player, and then use the Volume control on the radio as

needed for comfortable listening.

Headphone socket

A 3.5mm Stereo Headphone output socket located on the

rear of your radio is provided for use with headphones.

Inserting headphones will automatically mute the internal

loudspeaker. Please be aware that the sensitivity of

headphones can vary widely. We therefore recommend

setting the volume to a low level before connecting

headphones to the radio.

Excessive sound pressure from earphones

and headphones can cause hearing loss.

To prevent possible hearing damage, do not

listen at high volume levels for long periods.

IMPORTANT

Software version / Setting tuning step /

FM range setting

Software version

The software version display cannot be altered and is just

for your reference.

1. Turn off the radio.

2. Press and hold the Source button until you hear a beep

and the software version (e.g. VER XXX) is shown on

the display.

Setting tuning step

1. After the software version is shown on the display,

rotate the Tuning control knob until FM xkHz or AM

xkHz appears on the display, and press the Tuning

control button to enter FM or AM step setting. The

“xkHz” will flash on the display.

2. Rotate the Tuning control knob to select 50kHz / 100kHz

for FM radio, and 9kHz / 10kHz for AM radio. Then press

the Tuning control button to confirm the setting.

The tuning steps for North America are FM: 100kHz

and AM: 10kHz

The rest of the world is FM: 50kHz and AM: 9kHz

NOTE

Change in the AM tuning step setting will result in the

removal of all AM presets stored in the radio, this is not

the case for your FM tuning steps.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean RCR-30 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info