Bedienungsanleitung Sangean WFR-28D (Seite 15 von 83) (Englisch)

521929

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

10.

11.

If you chose ‘Pre-Shared Key’ in step 7, you should then choose the WEP option. The key

should be entered using only the numbers 0-9 and the letters A-F. The key will be 10 charac-

ters long for 64-bit encryption and 26 characters long for 128-bit encryption. The radio will

accept lower-case letters a-f as equivalent to upper-case A-F. Spaces or special symbols are

not permitted in WEP keys.

The three controls on the right-hand side of the screen have special functions:

select ‘ ’ to erase a character just entered (long press to clear); Info again to continue

select ‘ ’ when the complete encryption key has been entered

select ‘ ’ to cancel and go back to the SSID settings screen

Once the key is entered the radio should connect to your network. Please skip to step 11.

WPA and WPA2 are similar, although WPA2 offers a higher level of security. Whichever

you selected in step 7, you then have to specify the variant used. They are TKIP (Temporal

Key Integrity Protocol) and AES (Advanced Encryption Standard). As previously, the setting

should match that used by your router. Some routers allow both to be specied, and the rou-

ter will use whichever variant is supported by the connected device. AES is regarded as the

more secure option if it is available.

The radio will then require you to enter the encryption key. This must be a string of between 8

and 63 characters and must be identical to the key which has been entered into your router.

Note – the encryption key is sensitive to the use of upper and lower case letters and symbols.

Take care to enter the key exactly, or the radio will not be able to connect to your router. The

three controls on the right-hand side of the screen have special functions. You can access

these by rotating the Tuning Control Rotary and then press the Tuning Control Rotary to

select as you needed:

select ‘ ’ to erase a character just entered (long press to clear ); Info again to continue

select ‘ ’ when the complete encryption key has been entered

select ‘ ’ to cancel and go back to the TKIP / AES options screen

Once the key is entered the radio should connect to the network.

While the radio is trying to connect to the network, it will display ‘Processing…’ when chec-

king the encryption key and then ‘Connecting…’.

If the connection is made successfully, the radio will return to the Network settings menu.

If the unit cannot connect, then it will display a ‘Failed to connect’ message and will return to

the SSID entry screen (step 6).

Once connected, the network settings are stored in the radio. The settings are retained when

the radio is disconnected from the mains.

You may now use the Back and Mode buttons to access the functions of your radio.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-28D Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-28D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info