Bedienungsanleitung Sangean WFR-2D (Seite 15 von 84) (Englisch)

567119

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Connecting to your computer network- cont.

15. If your network is not found, it may be because the router is congured not to broadcast the

SSID. You should then scroll through the menu and select Manual settings option in order to

enter the network details manually. This is described in ‘Manual Network Conguration’. If your

network name is being broadcast, and it was not found, then try re-scanning (press the Back

button), and if necessary try moving your radio to a location to a location closer to your access

point/ router.

16. When the SSID for the wireless network you wish to connect to appears on the screen, touch

to select. If WiFi Protected Setup (WPS) was indicated, you will see an additional menu at this

point, otherwise proceed to step 17. Choose one of the WPS menu options as required for your

router (WPS may be via push button, or using an identication number). 'Push Button' - the

display prompts you to press the WPS button on your router or access point and touch OK on

screen. The two devices should then connect with the encryption key sent automatically to

the radio.

'PIN' - the display shows an identication number which you must enter into your router using

a web browser (refer to your router's user documentation). Then touch OK on screen on the

radio. The two devices should then connect with the encryption key sent automatically to the

radio.

'Skip WPS' - if you wish to enter the encryption key yourself. If you chose Push Button or PIN

the screen will then show 'Connecting...' and then 'Setup wizard completed'. Touch OK to exit

the setup wizard and then go to paragraph 20 on the next page.

17. If your network is congured without an encryption key, the screen should say 'Connecting...',

and then 'Setup wizard completed'. Touch OK to exit the setup wizard and enter Standby mode.

If this is the case then you have successfully connected your radio to your network, so please

go to paragraph 20 on the next page.

18. If the screen displays 'Network Key:', it is because the network is using one of the encryption

systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to

enter the correct WEP or WPA key into the radio to allow it to communicate with your wireless

network. If you do not have the WEP or WPA key, then you should obtain it from the person

who set up your network. Some wireless routers may come with an encryption key already set

up by the supplier, in which case you should refer to the documentation provided with it. WPA

is used here to also include WPA2.

00:00

Network Wizard

Paul’s network <WPS>

Manual settings

Setup Wizard

Network key:

Q E R T Y U I O P

A S D F G H J K L

Z X C B N M

Setup Wizard

123

123 - JONES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-2D Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-2D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info