Bedienungsanleitung Sangean WFR-2D (Seite 18 von 84) (Englisch)

567119

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Manual network conguration

If you do not wish to use DHCP for automatic conguration, or if your network is congured with

a hidden SSID, then you will need to enter some network settings manually. (Note - a hidden

SSID may prevent casual observers from detecting your network, but it is not recommended as a

means of network security.)

1. From the radios 'Settings'>'Network settings' menu, touch Manual settings. You must then choose

whether to connect using 'Wired' or 'Wireless' connections. If you choose 'Wireless' there are as

many as eleven settings screens, shown by the '1 of 11' progress marker at the top of the display.

If you choose 'Wired' there are seven screens and the progress marker will reect this, although

the steps to set up the network parameters are basically the same.

2. The next menu asks whether you wish to use DHCP to congure your network parameters (IP

address, subnet mask, gateway address, etc.). Unless you are familiar with networking and

related terminology, we recommend that you allow the use of DHCP. Choose DHCP Yes unless

you need to specify the network details manually.

If you have chosen 'Wired' and then DHCP Yes, your radio should now establish a connection

to the router using the Ethernet cable. Please skip to step 11 on page 20.

If you chose 'Wireless' and DHCP Yes, please skip to step 6 in order to set up the wireless

connection details. If you chose DHCP No for either connection method, the next step is to set

up the IP address.

3. The manually specied IP address should be chosen to be compatible with the settings in your

router and must be a unique address on your network. If you are using DHCP for some devices

and static (manually congured) IP addresses for others, the IP address used should fall outside

the range that the router may allocate using DHCP. Typically, the rst three groups of digits will

be the same for all devices on your network (Text entry is described on page 11). The display

may show an address of 0.0.0.0. To delete a character touch backspace. To clear, touch and

hold the backspace. Use digits and fullstop to enter the IP address, e.g. 192.168.1.25. Touch

the tick symbol to conrm. When the IP address has been entered, the subnet mask should be

entered. The subnet mask denes which parts of the IP address are common across your network.

For most small networks the subnet mask will be 255.255.255.0 and this is entered in the same way.

4. The Gateway address is normally the IP address of the router through which the radio connects

to the internet and is entered in the same way as the previous address.

Network Wizard

Paul’s network <WPS>

Manual settings

15:05

26 Jun 2010

Settings

192.168.1.25

1 3 4 5 6 7 8 9 0

! @

# $ % &

( )

_ +

: ;

、

Settings

123

IP address: [3/11]

Manual settings [1/11]

Add Wireless Network

Add Wired Network

15:05

26 Jun 2010

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-2D Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-2D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info