Bedienungsanleitung Sangean WFR-30 (Seite 9 von 81) (Englisch)

667074

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

8. Youwillthenneedtoset‘Keepnetworkconnected.’Bydefault,yourradiowillshutdownits

WiFiconnectionwhenitisinstandby.Thisminimizespowerconsumptionbutitdoesmean

thatyouwillneedtoswitchthatradioonmanuallyinordertouseeitherthe‘Playto’function

oranyotherremotecontrolsoftware.Ifyouneedtobe able toremotelycontroltheradio

even when it has been put into standby, then rotate the Tuning Control Rotary to highlight

‘YES’toactivatethisfunctionor‘NO’todeactivatethisfunction.Youcanalsochoosetokeep

thenetworkconnectedbyusingthe‘Keepnetworkconnected’optioninthenetworksetting

menu.InthestandbymodedisplayeithertheWiFisignalindicatorisshownwithorwithouta

cross through it according to the chosen network settings.

9. The display will then show a list of WiFi regional options for the network set up. Rotate the

Tuning Control Rotary tohighlight therequiredregionandthenpresstheTuningControl

Rotary to select it. Your radio will then scan for available WiFi networks.

10.TheradiowillentertheNetworkSettingsWizardandwilldisplay‘Scanning…’.Afterashort

while the display will show a list of the available WiFi networks.

11. You will first need to identify your network in the list of network names presented by the

NetworkWizard.Ifnonetworksarefoundthen you mayhavetogetyourwirelessrouter

working(pleaseseetheinstructionssuppliedwithit)oryoumaybetoofarfromtherouter.

Whentheradiofindsyourwirelessnetwork,itdisplaystheNetworkName(SSID) for the

wireless access point on the screen. This is a name that is allocated to the access point in

yourrouterbythepersonwhosetupthenetwork–forexample:‘Jonesfamily’or‘Paul’s

network’.IftheroutersupportsWiFiProtecedSetup,then‘[WPS]’will be showninfrontof

theSSID.Itispossible,andinsomelocationshighlylikely,thatyourradiowillndmorethan

one wireless network, in which case you should choose which one you need to connect to.

12.RotatetheTuningControlRotarytoseetheSSIDforeachwirelessnetworkthathasbeen

found.Ifyournetworkisshownproceedtostep14.Ifitisnotshownthenproceedtostep13.

Ifyoumakeamistakeatanypoint,usetheBackbuttontogobacktothepreviousscreen.

13.Ifyournetworkisnotfound,itmaybebecausetherouteriscongurednottobroadcastthe

SSID.YoushouldthenusetheTuning Control Rotary tohighlightandselectthe‘[Manual

cong]’optionin order toenterthenetworkdetailsmanually.Thisisdescribedin‘Manual

NetworkConguration”.Ifyournetworknameisbeingbroadcast,anditwasnotfound,then

try re-scanning press the Back button), and if necessary try moving your radio to a location

closertoyouraccesspoint/router.

Europe

Australia

Wlan region

Keep network connected?

Network settings

Network wizard

Scanning...

Network settings

Jones family

[WPS]Paul’s network

Smith

[Rescan]

SSID

[WPS]Paul’s network

Smith

[Rescan]

[Manual config]

SSID

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-30 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info