Bedienungsanleitung Sangean WFR-32 (Seite 17 von 19) (Englisch)

797030

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

5. After the devices have paired and connected, a

confirmation tone will be played on the radio and the

white bar near the top of the radio’s display will show

the message “Bluetooth Connected”.

You can now play music on your Bluetooth device and

stream the music through the radio’s speaker.

Notes:

●If 2 Bluetooth devices are pairing for the rst time,

both must search for your radio, it will show its

availability on both devices. However, if one device

links with this unit first, then the other Bluetooth

device won’t nd it on the list.

●If you take your Bluetooth device out of range,

the connection between your device and the radio

will be temporarily disconnected. Your radio will

automatically reconnect if the Bluetooth device is

brought back into range. Be aware that during the

period of disconnection, no other Bluetooth device

can pair or link with your radio.

●If “WFR-32” shows up in your Bluetooth device list,

but your Bluetooth device cannot connect with it,

please delete the item from your list and pair the

Bluetooth device with the radio again following the

steps described previously.

●The effective operation range between the radio

and the paired Bluetooth device is approximately 10

meters (30 feet). Any obstacle between the system

and the device can reduce the operational range.

●Bluetooth connectivity performance may vary

depending on the connected Bluetooth device.

Please refer to the Bluetooth capabilities of your

device before connecting it to your radio. Not all

features may be supported, depending on the

Bluetooth device used.

●With some mobile phones, making / receiving

calls, text messages, e-mails or any other activities

unrelated to audio streaming may mute the

Bluetooth audio streaming or even temporarily

disconnect from your device. Such behavior is

a function of the Bluetooth device and does not

indicate a problem with your WFR-32.

AUDIO PLAYBACK IN THE BLUETOOTH

MODE

When you have successfully connected your radio with

the chosen Bluetooth device you can start to play your

music using the controls on your connected Bluetooth

device.

1. Once playback has started, the display will show cover

art (if available), the connected Bluetooth device name,

the artist’s name, the track name, the album name and

the playback progress. repeatedly press the Next button

(6) on the radio or Right button (r) on the remote control

to zoom in on the cover art or view it in full screen.

2. Adjust the volume to the required setting using the

Volume control (4) on the radio, the Volume buttons (u)

on the remote control or on your Bluetooth device.

3. Use the controls on your Bluetooth source device to

play / pause and select tracks. Alternatively, playback

can be controlled using the remote control using the

Play / Pause (g), Next track (n), and Previous track

(h) buttons on the remote control or by pressing and

holding the Previous (5) and Next (6) buttons on the

radio to go to the previous or next track.

Note:

Not all player applications or devices may respond to

all of these controls.

AUDIO PLAYBACK FROM A PREVIOUSLY

PAIRED BLUETOOTH DEVICE

The WFR-32 can memorize up to 8 sets of paired

Bluetooth devices. Once more than 8 devices have been

connected, the earliest device with which the radio was

paired will be overwritten in the radio’s memory.

If your Bluetooth source device has previously paired with

the WFR-32 previously, the radio will still remember your

Bluetooth device and attempt to reconnect with the device

that was last connected. If the last connected Bluetooth

device is not available, the radio will try to connect to the

second last Bluetooth device.

DISCONNECTING YOUR BLUETOOTH

DEVICE

To disconnect your Bluetooth device, either turn off

Bluetooth on the Bluetooth device or switch to another

mode on the radio, for instance by tuning into an internet

radio station. If you disconnect the Bluetooth device

when the radio is in the Bluetooth mode, the white bar

near the top of the radio’s display will show “Bluetooth

Disconnected” and the radio will be available for pairing

again.

To connect to a different device, press the pair button on

the remote or apply a long press on the volume control on

the radio.

10. LISTENING TO MUSIC USING THE

AUX IN JACK

You can listen to the sound of an external device through

your WFR-32’s speaker. To do this, follow these steps.

1. Connect the external device (such as iPod, MP3 player

or CD player) to the radio’s Aux-in port (16) using a

3.5mm audio cable (not supplied).

2. Make sure both the radio and the external device are

turned on.

3. Select the AUX option in the radio’s main menu.

4. The audio output of the external device will now be

played through the speaker of your WFR-32. The

volume can be adjusted using the radio’s Volume

Control (4) or the Volume buttons (u) on the remote

control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-32 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-32

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info