Bedienungsanleitung Sangean WFR-70 (Seite 9 von 84) (Englisch)

667073

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

12. Rotate the Tuning Control Rotary to see the SSID for each wireless network that has been

found. If your network is shown proceed to step 14. If it is not shown then proceed to step 13.

If you make a mistake at any point, use the Back button to go back to the previous screen.

13. If your network is not found, it may be because the router is congured not to broadcast the

SSID. You should then use the Tuning Control Rotary to highlight and select the ‘[Manual

cong]’ option in order to enter the network details manually. This is described in ‘Manual

Network Conguration”. If your network name is being broadcast, and it was not found, then

try re-scanning press the Back button), and if necessary try moving your radio to a location

closer to your access point/router.

14. When the SSID for the wireless network you wish to connect to is highlighted on the screen,

press the Tuning Control Rotary. If WiFi Pretected Setup (WPS) was indicated, you will see

an additional menu at this point, otherwise proceed to step 14. choose one of the WPS menu

options as required for your router (WPS may be via push button, or using an identification

number).

‘Push Button’ – the display prompts you to press the WPS button on your router and then the

Select button on the radio. The two devices should then connect with the encryption key sent

automatically to the radio.

‘PIN’ – the display shows an identification number which you must enter into your router

using a web browser (refer to your router’s user documentation). You should then press the

Select button on the radio.

‘Skip WPS’ – if you wish to enter the encryption key yourself (or if it was previously Entered).

If you choose Push Button or PIN the screen will then show ‘Connecting…’ and then ‘Setup

wizard completed’. Press the Tuning Control Rotary to exit setup wizard.

15. If your network is congured without an encryption key, the screen should say ‘Connecting…’,

and then ‘Setup wizard completed’. Press the Tuning Control Rotary to exit the setup

wizard and show the main menu. If this is the case then you have successfully connected

your radio to your network.

16. If the screen displays ‘Key’ , it is because the network is using one of the encryption systems:

Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to enter

the correct WEP or WPA key into the radio to allow it to communicate with your wireless

network. If you do not have the WEP or WPA key, then you should obtain it from the person

who set up your network. Some wireless routers may come with an encryption key already

set up by the supplier, in which case you should refer to the documentation provided with

it. WPA is used here to also include WPA2. WEP keys are 10 or 26 characters long (using

0 – 9, and A – F). Some wireless Routers can also use pass-phrases for WEP but these

are not supported. WPA keys are usually set up using a pass-phrase of between 8 and 63

characters. Your radio accepts pass-phrases for WPA keys.

Jones family

[WPS]Paul’s network

Smith

[Rescan]

[Wired]

SSID

[WPS]Paul’s network

Smith

[Rescan]

[Wired]

[Manual config]

SSID

Push Button

Skip WPS

WPS Menu

Please wait

Connecting...

Network settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-70 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info