Bedienungsanleitung Sanitas SBC 25 (Seite 16 von 44) (Deutsch, Englisch, Französisch, Italienisch)

626625

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

The bar graph in the display and the scale on the unit indicate

the range of the blood pressure which has been recorded.

If the values for systolic and diastolic pressure are in two dif-

ferent WHO ranges (e.g. systolic in the high-normal range and

diastolic pressure in the normal range) the graphic WHO clas-

sification on the unit indicates the higher range (high-normal in

the example described).

6. Saving and displaying measurements

•

The results of each successful measurement are stored to-

gether with date and time. With more than 60 items of meas-

ured data, the earliest items of data measured are lost.

•

Select the desired user memory by pressing the button

and then the

button. Pressing the +/M button displays the

average value of the 3 most recent measurements stored in

the user memory. If you continue pressing the +/M button, the

latest individual results are displayed with date and time.

7. Deleting stored values

To delete individual measurements, you must first select them.

Press and hold the memory button +/M until CL appears in the

display. Then confirm the deletion with the user selection button

(CL and 00 appear in the display).

To delete measurements from a user memory, you must first

select them. Press the memory button +/M and the average

value of the last 3 saved measurements is displayed. Then

press and hold the memory button +/M again until CL appears

in the display. Confirm the deletion with the user selection but-

ton (CL and 00 appear in the display).

8. Error messages / troubleshooting

In case of faults, the E_ message appears in the display.

Error messages can occur when

the cuff is too tight or too loose (Er1),

you move or talk during the measurement (in addition to (E2),

the cardiac arrhythmia icon appears in the display),

3. the cuff is inflated for longer than 25 seconds (E3).

errors occur during measuring (E4),

5. inflation pressure is higher than 300 mmHg (E5).

6. the batteries are almost empty

(E6).

In the above cases, you must repeat the measurement. Make

sure that the cuff tube is properly inserted and that you do

not move or talk. Re-insert the batteries if necessary, or else

replace them.

9. Cleaning and Care

•

Clean your blood pressure computer carefully using only a

slightly moistened cloth.

•

Do not use any detergents or solvents.

•

Never hold the instrument under water as otherwise liquid

can penetrate and damage the instrument.

•

Never place any heavy objects on the instrument.

10. Technical details

Model no. SBC 28

Measurement Oscillating, non-invasive blood

method pressure measurement on the wrist

Measurement range systolic 50 – 250 mmHg,

diastolic 30 – 200 mmHg,

pulse 40 –180 beats/minute

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanitas SBC 25 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanitas SBC 25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info