626686
24
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
24
14. What if there are problems?
If the scale detects and error when measuring, the following is displayed.
Display Cause Remedy
The maximum load-bearing capacity of
150 kg was exceeded.
The load must not exceed 150 kg.
The scale batteries are almost flat. Replace the batteries of scale.
The control panel batteries are almost
flat.
Replace the batteries of control panel.
Faulty or no transmission between scale
platform and control panel.
Place the scale on a flat surface and
activate it correctly (wait for the display
to show „0.0“) and repeat the measure-
ment (see page 19).
No display The batteries in the control panel are enti-
rely flat.
Replace the batteries (see page 22).
The batteries in the control panel are not
correctly installed.
Check that the polarity is correct (Note
t
he graphic in the battery compartment.).
No measurement possible
Possible errors Remedy
The scale was not activated before being
stepped on. If you step onto the scale before
0.0“ appears in the display,
it will not function correctly.
Activate the scale correctly (wait for „0.0“) and re-
peat the measurement.
Switch on the control panel and the scale before the
measurement.
If necessary, wait 30 seconds and then repeat the
measurement.
Interference between scale and
control panel.
Remove and replace the batteries in the scale and
control panel or make sure that the transmitter and
receiver are not covered.
The control panel is too far from the scale. Reduce the distance between the scale and control
panel.
The scale batteries are flat. Replace the batteries (see page 22).
The connection between control panel and scale
is interrupted.
Do not cover the receiver and transmitter.
Incorrect weight measurement
Possible errors Remedy
Scale is on carpet. Place scale on a flat, solid surface.
Scale zero setting is incorrect. Switch on scale and wait until it switches off auto-
matically (LED off). Then repeat measurement.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanitas SBG 43 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info