403332
15
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
15
6. Saving, retrieving and deleting results
The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are
lost.
In order to retrieve measurement results again, press the
memory button ‚MEM‘. The instrument first displays the
number of memory spaces occupied and then automati-
cally switches to the last saved test result.
Pressing the memory button ‚MEM‘ again outputs the fur-
ther measurement values with date and time.
You can clear the memory by holding down the memory
button ‚MEM‘ for 3 seconds.
7. Error messages/troubleshooting
In case of faults, the ‚Er‘ message appears in the display.
Error messages can occur when
inflation takes longer than 3 minutes (Er6 appears in the
display),
the cuff is too tight or too loose (Er3 or Er4 appears in the
display),
the blood-pressure values are unusually high or low (Er1
or Er2 appears in the display),
the inflation pressure is higher than 300 mmHg (Er5 appears
in the display),
there is a system or device error (Er0, Er7, Er8, Er9, ErA or
ErB appears in the display),
the batteries are almost flat; the batteries must be re-
placed.
In the above cases, you must repeat the measurement. Make
sure that the cuff tube is properly inserted and that you do
not move or talk. Re-insert the batteries if necessary, or else
replace them.
8. Cleaning and storing the instrument
Clean your blood pressure computer carefully only with a
slightly moistened cloth.
Do not use detergents or solvents.
On no account must you immerse the computer in water,
otherwise liquid can enter it and cause demage.
When storing the device, make sure that no heavy objects
are placed on top of it. Remove the batteries. The cuff tube
should not have any sharp kinks.
9. Specifications
Model No. SBM 29
Method of Measurement Oscillometric, non-invasive blood
pressure measurement on the
upper arm
Range of Measurement Pressure 0 295 mmHg,
systolic 30 280 mmHg,
diastolic 30 280 mmHg,
pulse 40 –180 beats/minute
Accuracy of the systolic ± 3 mmHg/diastolic
pressure reading ± 3 mmHg/pulse ± 5 % of the
d isplayed value
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sanitas-sbm-29

Suche zurücksetzen

  • Suche den Schlauchverbinder als Ersatzteil vom Gerät zum Schlauch ?
    Mein Gerät - Typ SBM 29 Art.-Nr. 652.25 Eingereicht am 14-2-2021 17:35

    Antworten Frage melden
  • Ich wollte wie gewohnt meinen Blutdruck messen. Der meßvorgang wurde automatisch
    Abgebrochen und es wurde auf dem Display err 4 angezeigt. Was bedeutet das? Eingereicht am 11-8-2017 18:11

    Antworten Frage melden
  • Beim Start blinkt 2007. Wir haben aber das Jahr 2017, wie stelle ich das ein ?
    Eingereicht am 7-1-2017 14:24

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sanitas sbm 29 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sanitas sbm 29

Sanitas sbm 29 Bedienungsanleitung - Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info